Author Topic: VoodooPowerMini v1.2.5 - Reported Lower Voltage  (Read 6037 times)

0 Members and 1 Guest are viewing this topic.


  • Forum Moderator
  • Posts: 1150
VoodooPowerMini v1.2.5 - Reported Lower Voltage
« on: March 22, 2010, 08:20:06 PM »
Hi Superhai

I was just doing some testing and I can report that when using VoodooPowerMini v1.2.5 in conjunction with VoodooMonitor and leaving my machine idling at the Finder,  I see the voltage drop down to 1.116V which is what I would see when running with my DSDT with coded C-states. Is this the result of the latest update?

Temperature wise, I notice a drop by 2 degrees from 46 degrees (when using v1.2.49) to 44 degrees, so this to good. For comparison when using my DSDT, I see the temperature drop to 39 degrees.

Thanks and regards
blackosx :)
« Last Edit: March 23, 2010, 09:06:20 AM by Blackosx »
10.10.5 / 10.11 GM1 | Asus Maximum IV Gene-Z | i7-2600 3.40GHz | 4GB | Radeon 5770 1GB


  • VoodooLabs
  • Posts: 102
Re: VoodooPowerMini v1.2.5 - Reported Lower Voltage
« Reply #1 on: March 24, 2010, 09:14:07 AM »
In idle the voltage should have been the same for both versions in theory, so that you see an difference is odd. But I did rewrite the whole calculation so it could have been a slight bug in the previous version. It does also a slight undervolting of the higher p-states, so it should run cooler during load, and could be the reason why you see a drop in temperature. I will probably add this as an modifiable option if it causes problems, and to let other users adjust it themselves.