Chameleon > The Black Hole

Hazard Distro, Booter Options, SMB, DSDT, the works

<< < (2/2)

bozon42:
Hello,

legacy_kernel-10.3.0.pkg.zip pack helped me to get 10.3.0 kernel - thanks for the creator of this pack.

10.3.0 Darwin Kernel Version 10.3.0: Fri Apr 2 13:26:19 EDT 2010; annappirtrvh v3 :xnu-1504.3.12/BUILD/obj/RELEASE_I386 i386


The first problem I found is that I cannot boot into Leo disk0s2.

Regards,

bozon42

PS: rewritten /Volumes/SnowLeo/legacy_kernel -->mach_kernel
in :
/Extra/com.apple.Boot.plist
/Library/Preferences/SystemConfiguration//com.apple.Boot.plist
rewritten:
legacy_kernel -->mach_kernel

and OK!!!
p2: Leo -v -f arch=i386 cpus=1
p3: SnowLeo -v -f

Regards,

bozon42

Gringo Vermelho:
Well done, good job on cleaning up!  ;)

crazyhorsea29:

--- Quote from: bozon42 on April 04, 2010, 11:40:38 PM ---hi,
I ve done update of my Hazard distro (10.6.2) with 10.6.3 dmg file (not the combo),
but after reboot got error:

efi_inject_get_devprop_string NULL trying stringdata
Patched DMI Table.
No DSDT replacement found. Leaving ACPI data as is
Starting Darwin x86.

This is strange since I haven't used DSDT in 10.6.2 Hazard.
Note: it uses Chameleon RC3 PCEFI_10.5.
I have triple system on Acer5220 on one disk:
 (p1_Win7,p2_Leo 10.5.8, p3_Hazard10.6.2+ non working 10.6.3 update)
Will it solve my problem if I rename /SnowLeo/Extra to /SnowLeo/old_Extra so Chameleon won't find it an goes to /Library/Preferences/SystemConfiguration/com.apple.Boot.plist?
What should be the content of this file if I want to use 32bit mode?

Regards,
bozon42




--- End quote ---

hi. i noticed that i have the same -v output when i'm trying to boot into the installation. i'm using snow leopard hazard distro with option 10.6.2 and 10.6.3 update, chameleon and appleRTC(not sure if it's needed). Does it help if i don't choose 10.6.3? or i have some other problem. i'm using Samsung rv409.

Processors Information
-------------------------------------------------------------------------

Processor 1         ID = 0
   Number of cores      2 (max 8)
   Number of threads   2 (max 16)
   Name         Intel Pentium
   Codename      Arrandale
   Specification      Intel(R) Pentium(R) CPU        P6300  @ 2.27GHz
   Package (platform ID)   Socket 989 rPGA (0x4)
   CPUID         6.5.5
   Extended CPUID      6.25
   Core Stepping      K0
   Technology      32 nm
   TDP Limit      25 Watts
   Core Speed      2394.5 MHz
   Multiplier x Bus Speed   18.0 x 133.0 MHz
   Rated Bus speed      2394.5 MHz
   Stock frequency      2266 MHz
   Instructions sets   MMX, SSE, SSE2, SSE3, SSSE3, EM64T
   L1 Data cache      2 x 32 KBytes, 8-way set associative, 64-byte line size
   L1 Instruction cache   2 x 32 KBytes, 4-way set associative, 64-byte line size
   L2 cache      2 x 256 KBytes, 8-way set associative, 64-byte line size
   L3 cache      3 MBytes, 12-way set associative, 64-byte line size
   FID/VID Control      yes


   Turbo Mode      not supported
   Max turbo frequency   2266 MHz
   Max non-turbo ratio   17x
   Max turbo ratio      17x
   Max efficiency ratio   7x
   TDC Limit      25 Amps
   Core TDP      25 Watts
Max bus number      63
   Attached device      PCI device at bus 63, device 2, function 1

Gringo Vermelho:
This is the Black Hole, where we place posts that are against the forum rules.

We can't support non-retail installations here, too many unknowns. Post on InsanelyMac.

Please read my first reply where I explained to the OP how those messages are perfectly normal.

Navigation

[0] Message Index

[*] Previous page