Chameleon > The Black Hole
Hazard Distro, Booter Options, SMB, DSDT, the works
bozon42:
Hello,
legacy_kernel-10.3.0.pkg.zip pack helped me to get 10.3.0 kernel - thanks for the creator of this pack.
10.3.0 Darwin Kernel Version 10.3.0: Fri Apr 2 13:26:19 EDT 2010; annappirtrvh v3 :xnu-1504.3.12/BUILD/obj/RELEASE_I386 i386
The first problem I found is that I cannot boot into Leo disk0s2.
Regards,
bozon42
PS: rewritten /Volumes/SnowLeo/legacy_kernel -->mach_kernel
in :
/Extra/com.apple.Boot.plist
/Library/Preferences/SystemConfiguration//com.apple.Boot.plist
rewritten:
legacy_kernel -->mach_kernel
and OK!!!
p2: Leo -v -f arch=i386 cpus=1
p3: SnowLeo -v -f
Regards,
bozon42
Gringo Vermelho:
Well done, good job on cleaning up! ;)
crazyhorsea29:
--- Quote from: bozon42 on April 04, 2010, 11:40:38 PM ---hi,
I ve done update of my Hazard distro (10.6.2) with 10.6.3 dmg file (not the combo),
but after reboot got error:
efi_inject_get_devprop_string NULL trying stringdata
Patched DMI Table.
No DSDT replacement found. Leaving ACPI data as is
Starting Darwin x86.
This is strange since I haven't used DSDT in 10.6.2 Hazard.
Note: it uses Chameleon RC3 PCEFI_10.5.
I have triple system on Acer5220 on one disk:
(p1_Win7,p2_Leo 10.5.8, p3_Hazard10.6.2+ non working 10.6.3 update)
Will it solve my problem if I rename /SnowLeo/Extra to /SnowLeo/old_Extra so Chameleon won't find it an goes to /Library/Preferences/SystemConfiguration/com.apple.Boot.plist?
What should be the content of this file if I want to use 32bit mode?
Regards,
bozon42
--- End quote ---
hi. i noticed that i have the same -v output when i'm trying to boot into the installation. i'm using snow leopard hazard distro with option 10.6.2 and 10.6.3 update, chameleon and appleRTC(not sure if it's needed). Does it help if i don't choose 10.6.3? or i have some other problem. i'm using Samsung rv409.
Processors Information
-------------------------------------------------------------------------
Processor 1 ID = 0
Number of cores 2 (max 8)
Number of threads 2 (max 16)
Name Intel Pentium
Codename Arrandale
Specification Intel(R) Pentium(R) CPU P6300 @ 2.27GHz
Package (platform ID) Socket 989 rPGA (0x4)
CPUID 6.5.5
Extended CPUID 6.25
Core Stepping K0
Technology 32 nm
TDP Limit 25 Watts
Core Speed 2394.5 MHz
Multiplier x Bus Speed 18.0 x 133.0 MHz
Rated Bus speed 2394.5 MHz
Stock frequency 2266 MHz
Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, EM64T
L1 Data cache 2 x 32 KBytes, 8-way set associative, 64-byte line size
L1 Instruction cache 2 x 32 KBytes, 4-way set associative, 64-byte line size
L2 cache 2 x 256 KBytes, 8-way set associative, 64-byte line size
L3 cache 3 MBytes, 12-way set associative, 64-byte line size
FID/VID Control yes
Turbo Mode not supported
Max turbo frequency 2266 MHz
Max non-turbo ratio 17x
Max turbo ratio 17x
Max efficiency ratio 7x
TDC Limit 25 Amps
Core TDP 25 Watts
Max bus number 63
Attached device PCI device at bus 63, device 2, function 1
Gringo Vermelho:
This is the Black Hole, where we place posts that are against the forum rules.
We can't support non-retail installations here, too many unknowns. Post on InsanelyMac.
Please read my first reply where I explained to the OP how those messages are perfectly normal.
Navigation
[0] Message Index
[*] Previous page
Go to full version