VoodooPower > Bug Reports
VoodooPowerMini Snow feedback
Azimutz:
Ok.. this one loads but it seems there's no stepping. From kernel log:
i386 loaded from E/E.mkext (64 bit mode enabled):
--- Code: ---Apr 18 00:44:21 localhost kernel[0]: Voodoo[0x41CB6B8E] probe: 95: CPU Family 15 Model 6
Apr 18 00:44:21 localhost kernel[0]: Voodoo[0x41CB73C7] probe: 235: Netburst calculations
Apr 18 00:44:21 localhost kernel[0]: Voodoo[0x41CB73F9] probe: 236: Minimum fid: 0F vid: 27
Apr 18 00:44:21 localhost kernel[0]: Voodoo[0x41CB743B] probe: 237: Maximum fid: 0F vid: 27
Apr 18 00:44:21 localhost kernel[0]: Voodoo[0x41CB7495] probe: 241: Using preset values
Apr 18 00:44:21 localhost kernel[0]: Voodoo[0x41CB74C7] probe: 242: Minimum fid: 0E vid: 1A
Apr 18 00:44:21 localhost kernel[0]: Voodoo[0x41CB75A5] probe: 252: P-state 0 - 0F27
Apr 18 00:44:21 localhost kernel[0]: Voodoo[0x41CB75A5] probe: 252: P-state 1 - 0E1A
Apr 18 00:44:21 localhost kernel[0]: VoodooPowerMini 1.2 (C) 2009-10 Superhai, All Rights Reserved. Apr 18 2010 01:12:59 DEBUG 32 bit
--- End code ---
x86_64 loaded from S/L/E:
--- Code: ---Apr 18 01:02:47 AziLandz kernel[0]: Voodoo[0xFFFFFF7F80E0ECB1] probe: 95: CPU Family 15 Model 6
Apr 18 01:02:47 AziLandz kernel[0]: Voodoo[0xFFFFFF7F80E0F517] probe: 235: Netburst calculations
Apr 18 01:02:47 AziLandz kernel[0]: Voodoo[0xFFFFFF7F80E0F548] probe: 236: Minimum fid: 0F vid: 27
Apr 18 01:02:47 AziLandz kernel[0]: Voodoo[0xFFFFFF7F80E0F587] probe: 237: Maximum fid: 0F vid: 27
Apr 18 01:02:47 AziLandz kernel[0]: Voodoo[0xFFFFFF7F80E0F5DF] probe: 241: Using preset values
Apr 18 01:02:47 AziLandz kernel[0]: Voodoo[0xFFFFFF7F80E0F610] probe: 242: Minimum fid: 0E vid: 1A
Apr 18 01:02:47 AziLandz kernel[0]: Voodoo[0xFFFFFF7F80E0F6F3] probe: 252: P-state 0 - 0F27
Apr 18 01:02:47 AziLandz kernel[0]: Voodoo[0xFFFFFF7F80E0F6F3] probe: 252: P-state 1 - 0E1A
Apr 18 01:02:47 AziLandz kernel[0]: DSMOS has arrived
Apr 18 01:02:47 AziLandz kernel[0]: VoodooPowerMini 1.2 (C) 2009-10 Superhai, All Rights Reserved. Apr 18 2010 01:12:11 DEBUG 64 bit
--- End code ---
The main difference between loading from S/L/E versus E/E.mkext is that it loads later when from S/L/E. A while ago i managed to get pstate info from OS X with PstateChanger, etc.. after a ton of kp's:
pstate, MHz, mV, FID, VID
0= 3000, 1262, 0F, 27
1= 2800, 950, 0E, 1A
2= 2600, 1400, 0D, 0D
3= 2400, 1075, 0C, 00
Don't know if it's accurate (voltages seem a bit weird to me) but it's all i can show for now.
Still looking at sysctl, etc.. stuff. If you want i can roll up a archive with all the stuff you mention on the bug report template and send you a link, or just tell me what you need specifically and i'll get it :)
Superhai:
--- Quote from: Azimutz on April 18, 2010, 03:10:51 AM ---Don't know if it's accurate (voltages seem a bit weird to me) but it's all i can show for now.
Still looking at sysctl, etc.. stuff. If you want i can roll up a archive with all the stuff you mention on the bug report template and send you a link, or just tell me what you need specifically and i'll get it :)
--- End quote ---
What would be helpful would be the BIOS writers guide for netburst CPU's, but I am sure you don't have that.
I have some data however, so I think I will be able to make it work. I am curious which P-states you get with the older VoodooPower you said worked. At least the lowest FID should be 0x0C/12x.
The Netburst architecture has an odd vid-table, it seem to start with 0.8375 V and advancing in 0.1250 V steps. But it splits at 1.1000 V.
Azimutz:
Your assurance is right ;D googlin' for Netburst... ooh, it's a Intel CPU microarchitecture.
Yeah, voltages may seem strange to me but i know that can be normal.
Ok, let me check pstates with the old PowerMini.. that crossed my mind.
Update:
On Leo atm, VoodooPower & vpower app:
--- Quote ---Kernel Extension Name: VoodooPower.kext
Version: 1.2.3 Release Feb 15 2009 17:34:22
CPU: 2x Intel(R) Pentium(R) D CPU 3.00GHz
Technology: Intel Netburst New Desktop/Server [00000f65]
P-States : P00 FID 0f DID 00 VID 27
: P01 FID 0e DID 00 VID 20
: P02 FID 0d DID 00 VID 13
: P03 FID 0c DID 00 VID 06
--- End quote ---
.. long time since i last used vpower. Back to Snow.. VoodooPower is being a bitch there...
Update again:
I was assuming VoodooPower would work on Snow but, no. I don't even get kp, machine just freezes!
Is the info from Leo useful? If not i'm in the dark :P
rockingturtle:
Hey Superhai,
I am unable to download the beta release, it says "Go back to main".
-Rock
Blackosx:
Try it again, all the downloads are working from here.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version