Hi Black,
yep feedback is positive! Ok, so without further delay
Been looking most of the night (and now morning) at the latest moves, r20h to r26...
Device icons:
- comparing the set on r20h with the rest, the brown area is much better now, but the "front panel" was better on r20h.
The led still has no presence. How about you guys use the slightly darker front from the r20h?
Just the front, the rest is fine.
- A small detail; check the attached pic.. the pointed spot at least needs to be rounded.
- Also,
for my taste; the led should be moved a bit to the left; take the dvd drive icon as example
and place it half way between the end of the slot and the side?
The fonts, just some pointers:
- font_small is fine for the purpose.
Just want to mention something i've been noticing; a little test using it as font_console showed a problem i've been
seeing on other fonts; the spacing gets messed up to the point were some characters overlap the others,
while printing the files loading,etc...
- font_console is not bad.. no overlapping but, spacing still seems a bit weird. The m/M needs some care..
some other characters seem faded, v/V to x/X for instance.
The rest:
- color balance feels fine
- menu, if i try very hard
i'd say the '>' could be a bit smaller. Nice set Enzo!
- device selection.. distance is fine now. Finding it too simple.. don't know, need more time.
- device scroll, seems fine. I like the rounded arrows, that's for sure.
- the logo... will leave that for later. Black, no BIG lizard.. it gets scary
Think that's it. It's getting fine... will not please everyone but, that's normal!
Chief tester will be back later
recharging batteries...
Zef, read ya... yep not the best place. Let me finish committing the main stuff to CleanCut and
then we'll talk about this, maybe create a topic like you suggested.