Author Topic: Revisit Chameleon's package builder  (Read 78474 times)

0 Members and 1 Guest are viewing this topic.

ErmaC

  • Resident
  • Posts: 134
Re: Revisit Chameleon's package builder
« Reply #300 on: March 06, 2012, 07:26:59 PM »
Hi all.

I have a little bit of time now...
So..
ar is for arabic
ca is for catalan
i take the info from this link and it work for the language created manually until now.
1) http://msdn.microsoft.com/en-us/library/ms533052(v=vs.85).aspx
2) http://publib.boulder.ibm.com/infocenter/tsminfo/v6/index.jsp?topic=%2Fcom.ibm.itsm.client.doc%2Ft_inst_mac.html

Fabio
P6T Deluxe v1 i7 940 Quadro Fx 5600
P6T SE i7 920 GeForce GT 240

JrCs

  • VoodooLabs
  • Posts: 49
Re: Revisit Chameleon's package builder
« Reply #301 on: March 08, 2012, 09:51:22 AM »
Thanks ErmaC.

Also ErmaC don't forget to commit to VCS when you have correct some translations, because if we update the databases FROM VCS all modifications you have made will become suggestions.

JrCs

  • VoodooLabs
  • Posts: 49
Re: Revisit Chameleon's package builder
« Reply #302 on: March 09, 2012, 01:36:56 PM »
ErmaC you can commit to svn directly from pootle if you want.

ErmaC

  • Resident
  • Posts: 134
Re: Revisit Chameleon's package builder
« Reply #303 on: March 09, 2012, 02:27:11 PM »
Thx JrCs.

I'm busy now...
Monday I will commit more language on pootle...

Can you breafing me how commit from pootle? Also you say update languace from VCS...
What I do is compile the chameleon pkg in my local Hack, then "target" one language and update it with poedit, after that I rebuild the pkg to see if there is error, and then I commit it.

Fabio
P6T Deluxe v1 i7 940 Quadro Fx 5600
P6T SE i7 920 GeForce GT 240

Blackosx

  • Forum Moderator
  • Posts: 1150
Re: Revisit Chameleon's package builder
« Reply #304 on: March 09, 2012, 09:48:43 PM »
Sorry I haven't been contributing much to the pootle project guys.
I'm going away tomorrow for a week so I'll look more in to it when I return.

But keep up the good work you've been doing :P
10.10.5 / 10.11 GM1 | Asus Maximum IV Gene-Z | i7-2600 3.40GHz | 4GB | Radeon 5770 1GB

JrCs

  • VoodooLabs
  • Posts: 49
Re: Revisit Chameleon's package builder
« Reply #305 on: March 12, 2012, 12:29:26 PM »
Thx JrCs.

I'm busy now...
Monday I will commit more language on pootle...

Can you breafing me how commit from pootle? Also you say update languace from VCS...
What I do is compile the chameleon pkg in my local Hack, then "target" one language and update it with poedit, after that I rebuild the pkg to see if there is error, and then I commit it.

Fabio

VCS = Version Control System, it's like svn, cvs, git, etc....

It's better not to use POEdit directly. The best is to use Pootle for all the translation because POEdit change the format of the po file. But if you want to use POEdit, the best is download the po file from Pootle, edit it with POEdit then upload back to Pootle. After that click on the Review/Commit to VCS to commit the po file to chameleon trunk.

JrCs

ErmaC

  • Resident
  • Posts: 134
Re: Revisit Chameleon's package builder
« Reply #306 on: March 16, 2012, 12:32:34 PM »
Hi JrCs.

We need a correction...
Estonian el.po is not correct
el is for Greek

Also...
how create Chinese (traditional and simplified) zh_CN and zh_TW ? I copy & paste the field from my old translation but it need tiny revision from translator author.
Same for Portuguese pt-PT and pt_BR (Portugal and Brazil)

Fabio
P6T Deluxe v1 i7 940 Quadro Fx 5600
P6T SE i7 920 GeForce GT 240

JrCs

  • VoodooLabs
  • Posts: 49
Re: Revisit Chameleon's package builder
« Reply #307 on: March 16, 2012, 03:18:01 PM »
Hi JrCs.

We need a correction...
Estonian el.po is not correct
el is for Greek

Also...
how create Chinese (traditional and simplified) zh_CN and zh_TW ? I copy & paste the field from my old translation but it need tiny revision from translator author.
Same for Portuguese pt-PT and pt_BR (Portugal and Brazil)

Fabio

Thanks Fabio, all corrected

JrCs

  • VoodooLabs
  • Posts: 49
Re: Revisit Chameleon's package builder
« Reply #308 on: March 26, 2012, 09:25:55 AM »
To ErmaC: hi fabio, when you create a new po file (for a new language) don't take en.po as the source.
ALWAYS use the chameleon.pot file. I have change and commit the cs.po file.

ErmaC

  • Resident
  • Posts: 134
Re: Revisit Chameleon's package builder
« Reply #309 on: March 26, 2012, 02:00:42 PM »
To ErmaC: hi fabio, when you create a new po file (for a new language) don't take en.po as the source.
ALWAYS use the chameleon.pot file. I have change and commit the cs.po file.

OK!  :P

Other things relate to the package...
Can be add the option to select specific Pre-Made SMBioses?
(Courtesy of crazybirdy) I have 54 premade SMBios
Code: [Select]
iMac4.2.plist
iMac5.1.plist
iMac6.1.plist
iMac7.1.plist
iMac8.1.plist
iMac9.1.plist
iMac10.1.plist
iMac11.1.plist
iMac11.2.plist
iMac11.3.plist
iMac12.1.plist
iMac12.2.plist
MacBook2.1.plist
MacBook3.1.plist
MacBook4.1.plist
MacBook5.1.plist
MacBook5.2.plist
MacBook6.1.plist
MacBook7.1.plist
MacBookAir1.1.plist
MacBookAir2.1.plist
MacBookAir3.1.plist
MacBookAir3.2.plist
MacBookAir4.1.plist
MacBookAir4.2.plist
MacBookPro2.1.plist
MacBookPro2.2.plist
MacBookPro3.1.plist
MacBookPro4.1.plist
MacBookPro5.1.plist
MacBookPro5.2.plist
MacBookPro5.3.plist
MacBookPro5.4.plist
MacBookPro5.5.plist
MacBookPro6.1.plist
MacBookPro6.2.plist
MacBookPro7.1.plist
MacBookPro8.1.plist
MacBookPro8.2.plist
MacBookPro8.3.plist
MacMini2.1.plist
MacMini3.1.plist
MacMini4.1.plist
MacMini5.1.plist
MacMini5.2.plist
MacMini5.3.plist
MacPro1.1.plist
MacPro2.1.plist
MacPro3.1.plist
MacPro4.1.plist
MacPro5.1.plist
Xserve1.1.plist
Xserve2.1.plist
Xserve3.1.plist

Fabio
P6T Deluxe v1 i7 940 Quadro Fx 5600
P6T SE i7 920 GeForce GT 240