boot1: /boot_

[shuvro]

Hi
Can any one tall why i am gating (boot1:/done1_)
After i install Chameleon RC5 ?
Acer extensa 5420 Snowleopard 10.6.5

This is my partition

/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: FDisk_partition_scheme              *160.0 GB             disk0
1: Windows_NTFS ACER                      83.9 GB             disk0s1
2: Apple_HFS MacOSX                         31.8 GB             disk0s2
3: DOS_FAT_32 DATA                          44.3 GB             disk0s3

Every time i boot it show this then boot:
boot0: done
boot1: /boot_


Can anyone help me to fix this pls

shuvro

[Blackosx]

Hi shuvro

I've moved your post from the dev talk section to here where it belongs.
As for your problem.. I have to ask, have you added the stage 2 loader to disk0s2?

[shuvro]

Thanks for reply
i dont know .

how to added the stage 2 loader to disk0s2?

this was ok until i install Chameleon 2.0 RC5 r568 Standard.
now the partition looks like:-

fdisk: 1> p
Disk: /dev/rdisk0   geometry: 19457/255/63 [312581808 sectors]
Offset: 0   Signature: 0xAA55
         Starting       Ending
 #: id          cyl     hd   sec -      cyl      hd      sec [     start -             size]
-------------------------------------------------------------------------------------------------
  1: 07          0       1   1        - 1023   254      63 [              63 -  163943262] HPFS/QNX/AUX
*2: AF     1023       0   1        - 1023   254      63 [ 163943325 -    62091225] HFS+       
  3: 0F     1023       0   1        - 1023   254      63 [ 226034550 -    86542155] Extended LBA
  4: 00          0       0   0        -      0       0        0 [                0 -                0] unused     

pls tall me how to fix this.

shuvro

[zef]

Hi shuvro,

Please don't forget to update boot1h on your HFS+ partition as well. By reading your boot1 log, I'm pretty sure that you have an old version which couldn't handle large boot files. Recent boot1h loaders can't even print "boot1: /" messages.

[Blackosx]

how to added the stage 2 loader to disk0s2?

can u pls tall how can i update boot1h on HFS+ partition 

Hi Shuvro

You opened this topic by saying you installed Chameleon RC5, so how did you install that?

But to recap, (and to save typing) see installation instructions:
http://forum.voodooprojects.org/index.php/topic,754.msg3298.html#msg3298
http://forum.voodooprojects.org/index.php/topic,351.msg1484.html#msg1484

[shuvro]

I install Chameleon-2.0-RC5-r656 (pkg)

so i didn't had to do anything.
 
        sudo fdisk -f boot0 -u -y /dev/rdisk0
 
        sudo dd if=boot1h of=/dev/rdisk0s2
 
        sudo cp boot /

I update like this but still the same. How can i remove the old boot1h ?

thanks
shuvro

[shuvro]

Hi!
@Blackosx /@Zef

pls help me to hide this verbose log

boot0: done0
boot1: /boot_

from the beganing of the boot

thanks/shuvro

[Blackosx]

Hi shuvro

As you say you've done as Zef suggested and written a new version of boot1h to disk0s2, the reason you still see the verbose log is strange. All I can think of is the old boot1h must still be present.

Can you try manually installing the latest Chameleon files by issuing the commands in red as you've shown above to a spare USB memory stick but replacing disk0 and disk0s2 with the relevant numbers. You'll want the USB memory stick formatted as HFS with a GPT before doing so. Then add your /Extra folder to the USB and try booting from that. and see if you still see the boot1:done messages.