overdue-scratch

Author Topic: ALC889a - VoodooHDA v0.2.2  (Read 5600 times)

0 Members and 1 Guest are viewing this topic.

Trauma

  • Observer
  • Posts: 28
  • Took too much man !
    • http://www.darwinx86.org - The french OSx86 docs
ALC889a - VoodooHDA v0.2.2
« on: April 17, 2009, 01:08:42 AM »
Hy,

This is the result of the test i did on GA-EP45-DS4 + AL889a :

Outputs devices:
Unknow = sounds output on all analog prots like if they were only one port.
Headphones = working fine :)
SPDIF-out = not working (it's set to AC3 in the dump)

Inputs devices:
Mic = not working
Mic = not working
SPDIF-in = untested

Mute is working fine and Balance too.

After sleep the sound is crappy, it's look like a sample frequency problem. @44,1Khz the sound is distorded and @192Khz it's worst, there some kind of delay/echo plus the distortion.
Desktop : GA-EP45-DS4 / E8400 @ 3 Ghz / 2Go 1066Mhz RAM / Shutdown/Reboot/Sleep/Speedstep Os X 10.5.6 Retail + Chameleon v2 Apple Raid + 9.6.0 Vanilla
NetBook : MSi Wind U100-015 2 Gb 667Mhz RAM / Shutdown/Reboot/Sleep/Speedstep / Os X 10.5.6 Retail + Chamelon v2

netkas

  • Entrant
  • Posts: 4
Re: ALC889a - VoodooHDA v0.2.2
« Reply #1 on: April 20, 2009, 08:26:37 PM »
same mobo, same problems

what port gave u headphones output?

Trauma

  • Observer
  • Posts: 28
  • Took too much man !
    • http://www.darwinx86.org - The french OSx86 docs
Re: ALC889a - VoodooHDA v0.2.2
« Reply #2 on: April 21, 2009, 09:39:43 AM »
Headphones works on the front connector. (from internal connector)

Bye.
Desktop : GA-EP45-DS4 / E8400 @ 3 Ghz / 2Go 1066Mhz RAM / Shutdown/Reboot/Sleep/Speedstep Os X 10.5.6 Retail + Chameleon v2 Apple Raid + 9.6.0 Vanilla
NetBook : MSi Wind U100-015 2 Gb 667Mhz RAM / Shutdown/Reboot/Sleep/Speedstep / Os X 10.5.6 Retail + Chamelon v2

madcow

  • Entrant
  • Posts: 1
Re: ALC889a - VoodooHDA v0.2.2
« Reply #3 on: April 25, 2009, 10:24:58 AM »
v0.2.2 simplify the output and input list however, Previous version can sync with the hotkey and taskbar controller for sound control .. to And yet the auto jack detection is not working ..

bigkahuna

  • Entrant
  • Posts: 3
Re: ALC889a - VoodooHDA v0.2.2
« Reply #4 on: May 11, 2009, 06:03:16 AM »
Bump, wanted to post my dump, I think all ports are detected, how do I enable them?