Author Topic: 2 Drives with versions of OSX -- Chameleon Boot Screen Locks  (Read 2436 times)

0 Members and 1 Guest are viewing this topic.

jemiller1963

  • Entrant
  • Posts: 1
Hi all,

I have Kalyway 10.5.2 installed on an AMD system that's been running fine for awhile.  I decided to try out SL and installed on a separate drive using GeekNizer's instructions that installed with no problem.  But when I rebooted to the Chameleon boot screen, it locks up.  I use the Kalyway disk now to boot into my original install which is still working fine.

Both Leopard and Snow have Chameleon installed via the installer

Here is the list of disks. Volta is USB attached backup:
***************************************
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *931.5 Gi   disk0
   1:                        EFI                         200.0 Mi   disk0s1
   2:                  Apple_HFS Volta                   931.2 Gi   disk0s2
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:     FDisk_partition_scheme                        *372.6 Gi   disk1
   1:                  Apple_HFS Leopard                 372.6 Gi   disk1s1
/dev/disk2
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *232.9 Gi   disk2
   1:                        EFI                         200.0 Mi   disk2s1
   2:                  Apple_HFS Snow                    232.6 Gi   disk2s2


***************************************

Here is the com.apple.boot.plist for Leopard:
***************************************
<plist version="1.0">
<dict>
   <key>Kernel</key>
   <string>mach_kernel</string>
   <key>Kernel Flags</key>
   <string>-v -legacy</string>
   <key>Timeout</key>
   <string>5</string>
</dict>
</plist>

***************************************

Here is the com.apple.boot.plist for Snow
**************************************
<plist version="1.0">
<dict>
   <key>Kernel</key>
   <string>mach_kernel.test7</string>
   <key>Kernel Flags</key>
   <string></string>
</dict>
</plist>

**************************************

I checked all of the guides and I'm sure I'm over looking something.  Any help would be appreciated!

 :-\
disk1s1 Kalyway 10.5.2/disk2s2 10.6 Retail -  ASUS M2A-VM AM2 AMD 690G Micro ATX AMD - ATI Radeon HD 3800 - Chameleon-2.0-RC4-r684