ATI/AMD GraphicsEnabler support (legacy, modules & missing devices)!

[Blackosx]

Hey Azi

Sorry to hear things aren't too good for you right now. Don't worry about anything here. You just concentrate on working things out.

Take care buddy and hopefully I'll see you about sometime in the future.

[robertx]

take care Az...."May the Shwartz be with You"

[Zane]

Hi guys...
Just a quick fly by to inform that my activities on the scene are suspended for indefinite time,
due to work and health issues.
Besides the occasional peek at the forge and svn activity, i've been totally out of the loop for the past couple of months
and i have no prevision to when or if i will get back to a steady work here (topic and scene).
About the topic, i really don't know what to do with it!? For now i will leave it as is and unlocked.

Will try to keep an eye on the scene and post/commit some stuff on the little free time that i have,
so no "good bye's", just a "see you later" and a big Thanks to everyone that helped and cared.

Sorry for taking so long to post this info... these are sad and troubled times for me
Stay safe...

Take Care Azi. We'll see you in a bit.

[Gringo Vermelho]

my activities on the scene are suspended for indefinite time,
due to work and health issues.

Get well soon Azi, we'll keep the forums warm until your return.

[ketcap]

Could you support HP Compaq nc6400 ATI Mobility Radeon X1300? Please

714a:1002

Chipset: "ATI Mobility Radeon X1300" (Chipset = 0x714a)
(PciSubVendor = 0x103c, PciSubDevice = 0x30ac)

Thank you very much. I will be so appriciated

[sandokan71]

Hi!

Could you please add support for my ASUS EAX1950Pro. It works great on SnowLeo 10.6.7 @ 32bit but I can't get it to work on Lion 10.7.2 (32 or 64 bit).

Card model name: ASUS EAX1950Pro (256MB)

lspci output:

ATI Technologies Inc RV570 [Radeon X1950 Pro] [1002:7280] (rev 9a) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:0182]
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at <ignored> (64-bit, prefetchable)
Memory at fdff0000 (64-bit, non-prefetchable)
I/O ports at bc00
Expansion ROM at fdfc0000 [disabled]
Capabilities: [50] Power Management version 2
Capabilities: [58] Express Endpoint, MSI 00
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Capabilities: [100] #1002
--------------------

Some more information: I experience the same behaviour as in post81:

"the system will show the grey apple screen with the throbber. At the time when the GUI (desktop/login-window) is suppose to load, the screen flickers as the system attempts to load that, then it falls back to the grey apple screen again. This repeats indefinitely. When using "-v" (verbose boot), the screen will clear to black, showing only the text-cursor (white block) at the top left of the screen. The GUI mouse pointer will show momentarily (while the text-cursor disappears), then the mouse pointer disappears and the text-cursor shows. Again repeating indefinitely. I can't login once this happens."


THANKS for your great JOB! 
S.

[kizwan]

Hi guys...
Just a quick fly by to inform that my activities on the scene are suspended for indefinite time,
due to work and health issues.

Hi,

I hope you get well soon & have a lot of happiness in this year. I'm just curious, you are not in some mountain, building an ark, aren't you? I'm just kidding. 

Hi All,

I hope someone can help with my problem. I have use eGPU (external GPU) on my notebook for a couple of month now. You can see here. I also have not active on OSX scenes for a couple of month too. So, I already forgetting a lot of things. Last a couple of days, I tried to get my eGPU working on 10.6.7. I'm using Kabyl's boot file (r749) & with GraphicsEnabler. I managed to get drivers loaded & monitor detected but no video on the monitor. I noticed, it use Motmot. According to ati.c, my 5870 should use Zonalis:-

Code: [Select]

{ 0x6898, 0x0B001002, CHIP_FAMILY_CYPRESS, "ATI Radeon HD 5870", kZonalis },
So, anyone have any idea why & how can I change it to use Zonalis or Vervet or Uakari?

It turn out I didn't use Kabyl's boot file. I accidentally use trunk boot file. I now use Kabyl's boot file with 0x6898 (5870) set to Uakari. Now I get output on both internal & external monitor. However, I need to removed ATIRadeonX3000.kext. If not, I got distorted output (blocks of weird colors) on external monitor. So, I have QE/CI on internal but no QE/CI on external monitor. Both support native resolutions (1366x768 & 1920x1080 respectively).








I think if I want to fixed the distorted output on 5870 screen, I need to patch the Uakari personality.

[smartek]

Hello, I need help for my ATI6320.

My DeviceID is: 9806 and I cant enable is.

Greetz

[p4r4d0x86]

Hello,

I want to come back on the case of AMD HD 6310 and 6320 integrated in AMD APU E350 and E450 (zacate).
(and AMD HD 6250/6290 integrated in AMD APU C30, C50 and C60 (ontario).

I didn't yet completely read the thread so I don't know if HD 4330 is now supported but I want to say that agreed the following website :
http://www.notebookcheck.net/AMD-Radeon-HD-6320.54746.0.html

The AMD Radeon HD 6320 (or perhaps also called ATI Mobility Radeon HD 6320) is an integrated graphics card in the Zacate netbook processor. It is based on the same graphics core as the ATI Mobility Radeon HD 4330 but without any dedicated memory. Compared to the slower Radeon HD 6310, the 6320 offers the same base clock rate, but in difference features the automatic overclocking to 600MHz (Turbo Core).

Is there any chance to get the support of AMD HD 6310 and 6320 knowing this ?

I recently buy an ASUS u32u with E450 and so a HD 6320.
I enter yesterday in hackintosh community but I learn fast. ;-)

Maybe can I do some tests on my hardware after reading required stuff if you provide me stuff to test ?

[goodman]

thank you ,i'll test with 2 files!

[fabiokell]

Hi Azimutz

I have a early 2006 Imac which i upgraded to core 2 duo and installed lion using a version of lion GM for unsupported macs. Anyways, the boot for the imac for 32 bit works perfectly as it should.

My whole nightmare is the boot in 64bit. So far after checking lots of forums and troubleshooting lots of things i came to this thread. I followed basically the steps on the first from you here and the R1515 is the chameleon version that i have installed on my imac. My problem is the black screen. I even check the post for darles, since hes graphic board is almost the same as mine (ATI X1600) but mine has only 128mb of RAM, still did not worked.

Any tip for passing this black screen? I mean, should be not that difficult for a imac since most of the things should be compatible no? If not, could you give me some steps on how to solve this black screen?

I appreciate any help!

Thanks

Fabio

[macdav]

Hi would be great if you could add "Sapphire Radeon HD5450 1GB"

from IORegistryExplorer

Vendor ID <02 10 00 00>
Device id <f9 68 00>
Subsystem Vendor ID <4b 17 00 00>
Subsystem IID <64 e1 00 00>


Thanks

[litemint]

Gents, I would like to request for kext on below GPU on ML please, thank you in advance.

I tried ejecting CPU & device ID on ATI6000 and amdradeon kext, but it doesnt recognize the GPU.

Code: [Select]

http://valid.canardpc.com/2726039


AMD E-450
Windows 8 (6.2) 32-bit (Build 9200)
CPU Arch : 1 CPU - 2 Cores - 2 Threads
CPU PSN : AMD E-450 APU with Radeon HD Graphics
CPU EXT : MMX(+), SSE (1, 2, 3, 3S, 4A), x86-64, AMD-V
CPUID : F.2.0 / Extended : 14.2
CPU Cache : L1 : 2 x 32 / 2 x 32 KB - L2 : 2 x 512 KB
Core : (40 nm) / Stepping : ON-C0
Freq : 822.92 MHz (99.75 * 8.25)
MB Brand : Sony Corporation
MB Model : VAIO
NB : AMD A40/A50 Series FCH rev 00
SB : AMD SB800 rev 40
GPU Type : AMD Radeon HD 6320 series Graphics
DirectX Version : 11.0
RAM : 2048 MB DDR3
RAM Speed : 665 MHz (3:20) @ 9-9-9-24
Slot 1 : 2048MB (10700)
Slot 1 Manufacturer : Samsung