Chameleon > DevTalk
ATI/AMD GraphicsEnabler support (legacy, modules & missing devices)!
sandokan71:
Hi!
Could you please add support for my ASUS EAX1950Pro. It works great on SnowLeo 10.6.7 @ 32bit but I can't get it to work on Lion 10.7.2 (32 or 64 bit).
Card model name: ASUS EAX1950Pro (256MB)
lspci output:
ATI Technologies Inc RV570 [Radeon X1950 Pro] [1002:7280] (rev 9a) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:0182]
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at <ignored> (64-bit, prefetchable)
Memory at fdff0000 (64-bit, non-prefetchable)
I/O ports at bc00
Expansion ROM at fdfc0000 [disabled]
Capabilities: [50] Power Management version 2
Capabilities: [58] Express Endpoint, MSI 00
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Capabilities: [100] #1002
--------------------
Some more information: I experience the same behaviour as in post81:
"the system will show the grey apple screen with the throbber. At the time when the GUI (desktop/login-window) is suppose to load, the screen flickers as the system attempts to load that, then it falls back to the grey apple screen again. This repeats indefinitely. When using "-v" (verbose boot), the screen will clear to black, showing only the text-cursor (white block) at the top left of the screen. The GUI mouse pointer will show momentarily (while the text-cursor disappears), then the mouse pointer disappears and the text-cursor shows. Again repeating indefinitely. I can't login once this happens."
THANKS for your great JOB! 8)
S.
kizwan:
--- Quote from: Azimutz on December 01, 2011, 03:28:52 PM ---Hi guys...
Just a quick fly by to inform that my activities on the scene are suspended for indefinite time,
due to work and health issues.
--- End quote ---
Hi,
I hope you get well soon & have a lot of happiness in this year. I'm just curious, you are not in some mountain, building an ark, aren't you? I'm just kidding. ;D
Hi All,
I hope someone can help with my problem. I have use eGPU (external GPU) on my notebook for a couple of month now. You can see here. I also have not active on OSX scenes for a couple of month too. So, I already forgetting a lot of things. Last a couple of days, I tried to get my eGPU working on 10.6.7. I'm using Kabyl's boot file (r749) & with GraphicsEnabler. I managed to get drivers loaded & monitor detected but no video on the monitor. I noticed, it use Motmot. According to ati.c, my 5870 should use Zonalis:-
--- Code: ---{ 0x6898, 0x0B001002, CHIP_FAMILY_CYPRESS, "ATI Radeon HD 5870", kZonalis },
--- End code ---
So, anyone have any idea why & how can I change it to use Zonalis or Vervet or Uakari?
It turn out I didn't use Kabyl's boot file. I accidentally use trunk boot file. I now use Kabyl's boot file with 0x6898 (5870) set to Uakari. Now I get output on both internal & external monitor. However, I need to removed ATIRadeonX3000.kext. If not, I got distorted output (blocks of weird colors) on external monitor. So, I have QE/CI on internal but no QE/CI on external monitor. Both support native resolutions (1366x768 & 1920x1080 respectively).
I think if I want to fixed the distorted output on 5870 screen, I need to patch the Uakari personality.
smartek:
Hello, I need help for my ATI6320.
My DeviceID is: 9806 and I cant enable is. :(
Greetz
p4r4d0x86:
Hello,
I want to come back on the case of AMD HD 6310 and 6320 integrated in AMD APU E350 and E450 (zacate).
(and AMD HD 6250/6290 integrated in AMD APU C30, C50 and C60 (ontario).
I didn't yet completely read the thread so I don't know if HD 4330 is now supported but I want to say that agreed the following website :
http://www.notebookcheck.net/AMD-Radeon-HD-6320.54746.0.html
The AMD Radeon HD 6320 (or perhaps also called ATI Mobility Radeon HD 6320) is an integrated graphics card in the Zacate netbook processor. It is based on the same graphics core as the ATI Mobility Radeon HD 4330 but without any dedicated memory. Compared to the slower Radeon HD 6310, the 6320 offers the same base clock rate, but in difference features the automatic overclocking to 600MHz (Turbo Core).
Is there any chance to get the support of AMD HD 6310 and 6320 knowing this ?
I recently buy an ASUS u32u with E450 and so a HD 6320.
I enter yesterday in hackintosh community but I learn fast. ;-)
Maybe can I do some tests on my hardware after reading required stuff if you provide me stuff to test ?
goodman:
thank you ,i'll test with 2 files!
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version