Author Topic: ATI/AMD GraphicsEnabler support (legacy, modules & missing devices)!  (Read 190249 times)

0 Members and 1 Guest are viewing this topic.

ophtha72

  • Observer
  • Posts: 12
Re: ATI/AMD GraphicsEnabler support (legacy, modules & missing devices)!
« Reply #150 on: September 02, 2011, 03:40:43 PM »
Azimutz works everything here voluntarily, because he loves to do.
Even if he is late to comment or reply, we should not force him to do.
We have no right to blame Azimutz.

brandonb21

  • Entrant
  • Posts: 3
Re: ATI/AMD GraphicsEnabler support (legacy, modules & missing devices)!
« Reply #151 on: September 03, 2011, 05:17:42 PM »
ATI Mobility Radeon X1400, Enum\PCI\VEN_1002&DEV_7145&SUBSYS_20021028&REV_00



add this card please and thank you

Azimutz

  • VoodooLabs
  • Posts: 420
  • Paranoid Android
Re: ATI/AMD GraphicsEnabler support (legacy, modules & missing devices)!
« Reply #152 on: September 05, 2011, 03:14:39 AM »
So, what's up..? Can't a guy enjoy some vacations anymore??.. :P

I just came around to inform you guys that this topic is not "sticky" anymore and
will most probably be moved out of DevTalk. More news soon...

For now, i just want to remind to some about "reading";
from 1st post:
Quote
...
Meanwhile, as i'm messing with this code and there are a lot of device id's missing from it, i've been accepting
issues on the forge from people asking for them or simply thinking "this is a bug of some sort". It happens that,
using GraphicsEnabler many times is not the full solution for proper graphics display, as e.g. the laptop owners can
certainly confirm. And this is were i need to draw a line to protect my sanity!

  I can't possibly try to code, accept issues and still have to point people to solutions for non Chameleon problems,
or simply teach them how to get a card's subsys id!! So, to make mine (and your's) life easier, there's this topic.
I will explain what i need from you, how to get it and also provide links to some prominent topics on this matter.
As always, i'll try to give general help, if i have free time and you guys behave properly, and not take other's time
with questions you should ask some were else.
...
notice the part about "my sanity"... i'll answer posts when i have time!


Mod notes: notice.
 System & Patches: http://goo.gl/i961
 Chameleon:
- trunk builds: http://goo.gl/9G1Hq
- pref pane: http://goo.gl/OL2UT

brandonb21

  • Entrant
  • Posts: 3
Re: ATI/AMD GraphicsEnabler support (legacy, modules & missing devices)!
« Reply #153 on: September 05, 2011, 05:04:36 PM »
did i give you enough info for my card?

Zane

  • Member
  • Posts: 81
Re: ATI/AMD GraphicsEnabler support (legacy, modules & missing devices)!
« Reply #154 on: September 14, 2011, 12:43:12 PM »
Figured i would add my card's information here too.

I am running on a HP Envy 1150-nr with a Radeon HD5830M.

This is an lspci -nn output from Ubuntu. I think they got the chipset wrong for the card. It's supposed to be Broadway LP not Pro.

Code: [Select]
root@ubuntu:~# lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM Controller [8086:0044] (rev 02)
00:01.0 PCI bridge [0604]: Intel Corporation Core Processor PCI Express x16 Root Port [8086:0045] (rev 02)
00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 05)
00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 05)
00:1c.1 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 [8086:3b44] (rev 05)
00:1d.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 05)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev a5)
00:1f.0 ISA bridge [0601]: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller [8086:3b03] (rev 05)
00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller [8086:3b2f] (rev 05)
00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 05)
00:1f.6 Signal processing controller [1180]: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem [8086:3b32] (rev 05)
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Broadway PRO [Mobility Radeon HD 5800 Series] [1002:68a1]
01:00.1 Audio device [0403]: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] [1002:aa58]
02:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6200 [8086:4239] (rev 35)
03:00.0 Ethernet controller [0200]: Atheros Communications AR8131 Gigabit Ethernet [1969:1063] (rev c0)
ff:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers [8086:2c62] (rev 02)
ff:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture System Address Decoder [8086:2d01] (rev 02)
ff:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0 [8086:2d10] (rev 02)
ff:02.1 Host bridge [0600]: Intel Corporation Core Processor QPI Physical 0 [8086:2d11] (rev 02)
ff:02.2 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d12] (rev 02)
ff:02.3 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d13] (rev 02)

Device ID in Windows
Code: [Select]
PCI\VEN_1002&DEV_68A1&SUBSYS_1522103C&REV_00

Radeon Bios Rom Decoded
Code: [Select]
bash-3.2# ./radeon_bios_decode < 1002_68a1.rom
ATOM BIOS Rom:
SubsystemVendorID: 0x103c SubsystemID: 0x7009
IOBaseAddress: 0x4000
Filename: BR036968.001
BIOS Bootup Message:
BROADWAY LP HP/Quanta Nikita with DDR3 64Mx16                               

PCI ID: 1002:68a1
Connector at index 0
Type [@offset 46500]: LVDS (7)
Encoder [@offset 46504]: INTERNAL_UNIPHY (0x1e)
i2cid [@offset 46556]: 0x96, OSX senseid: 0x7
Connector at index 1
Type [@offset 46510]: HDMI-A (11)
Encoder [@offset 46514]: INTERNAL_UNIPHY1 (0x20)
i2cid [@offset 46579]: 0x90, OSX senseid: 0x1


GPU-Z



The zip attached contains:
Code: [Select]
ioreg -lfw0
bdmesg GE= OFF
Screenshot using GPU-Z
Radeon Bios Rom
Radeon Bios Rom Decoded
32 and 64 bit ATI Personalities
kextstat


EDIT: Looking at my Everest Output, i see that the card i have is being detected as a HD5850M? Which is interesting because according to wikipedia. The frequency that the card is running at is a Broadway LP? This is very conflicting. The decoded Bios roms states as Broadway LP though. So i think its best to follow the Bios rom.

Output from Everest:
Code: [Select]
--------[ GPU ]-------------------------------------------------------------------------

  [ PCI Express 2.0 x16: ATI Mobility Radeon HD 5850 (HP) ]

    Graphics Processor Properties:
      Video Adapter                                     ATI Mobility Radeon HD 5850 (HP)
      BIOS Version                                      012.014.000.007.036968
      BIOS Date                                         03/25/10,05:12:3
      GPU Code Name                                     Broadway Pro
      Part Number                                       BR036968.001
      PCI Device                                        1002-68A1 / 103C-1522  (Rev 00)
      Transistors                                       1040 million
      Process Technology                                40 nm
      Die Size                                          170 mm2
      Bus Type                                          PCI Express 2.0 x16 @ x8
      Memory Size                                       1 GB
      GPU Clock                                         100 MHz  (original: 500 MHz)
      RAMDAC Clock                                      400 MHz
      Pixel Pipelines                                   16
      Texture Mapping Units                             40
      Unified Shaders                                   800  (v5.0)
      DirectX Hardware Support                          DirectX v11
      Pixel Fillrate                                    1600 MPixel/s
      Texel Fillrate                                    4000 MTexel/s

    Memory Bus Properties:
      Bus Type                                          GDDR3
      Bus Width                                         128-bit
      Real Clock                                        200 MHz (DDR)  (original: 800 MHz)
      Effective Clock                                   400 MHz
      Bandwidth                                         6400 MB/s

    Utilization:
      GPU                                               67%

    ATI PowerPlay (BIOS):
      State #1                                          GPU: 500 MHz, Memory: 800 MHz  (Boot)
      State #2                                          GPU: 500 MHz, Memory: 800 MHz
      State #3                                          GPU: 300 MHz, Memory: 300 MHz
      State #4                                          GPU: 500 MHz, Memory: 800 MHz
      State #5                                          GPU: 400 MHz, Memory: 800 MHz  (UVD)
      State #6                                          GPU: 300 MHz, Memory: 300 MHz
      State #7                                          GPU: 300 MHz, Memory: 450 MHz
      State #8                                          GPU: 400 MHz, Memory: 550 MHz

    Graphics Processor Manufacturer:
      Company Name                                      Advanced Micro Devices, Inc.
      Product Information                               http://www.amd.com/us/products/Pages/graphics.aspx
      Driver Download                                   http://sites.amd.com/us/game/downloads/Pages/downloads.aspx
      Driver Update                                     http://www.aida64.com/driver-updates

EDIT 2: Just tried ALL the Framebuffers. Seems like i can't get any to work. There is output on the External Display connected via HDMI and QE/CI isn't an issue there. The issue is getting the internal LCD screen to work.

EDIT 3: Just installed Lion and upgrade to 10.7.1 Currently using the latest boot file from the trunk which is r1518. Used GE=Yes and AtiConfig=Zonalis with a HDMI Cable plugged into a External Display. Now my LVDS Laptop display works but its detected as the External Display which is a Sony TV. Very weird but interesting.


All above information is now Irrelevant. ;)

I got the card working in OS X 10.7.1 Lion. So far so good, QE/CI is working perfectly and temperatures are good too. Seems interesting.

How i got it working:

The card's device ID is definitely in the Chameleon Source Code so i didn't need to do any adding there. Upon checking of ATI5000Controller kext, the device ID is also in there. So no editing need there either. However, I guess OS X has issues with LVDS displays and is unable to detect my display, i had to get the EDID for my LCD through Windows and once i've done that i had to do an override for the EDID. After the override, the default framebuffer nomascus didn't work either. I switched the Framebuffer to Hoolock and it worked. I believe that the EDID override plays an important role in this as i had the same issue with a black screen for Snow Leopard. If Azi wants me to test for 10.6.8 i would be glad to, other then that i'm sticking with 10.7.1. If anyone has similar issues i hope this will help you. About the EDID part, you need to follow this guide to get it working. The "symptoms" of my card are all above.
« Last Edit: September 15, 2011, 11:47:43 AM by Zane »
http://bit.ly/osx86log Lenovo Y550P OSx86 Log
http://bit.ly/envyosx64log HP Envy 15 1150nr OSx64 log

ophtha72

  • Observer
  • Posts: 12
Re: ATI/AMD GraphicsEnabler support (legacy, modules & missing devices)!
« Reply #155 on: September 15, 2011, 02:56:49 PM »
Hi, Azimutz


I am struggling to install ATI firepro V9800, which is identical to HD5870 eyefinity6 except memory size(4GB).It has 6 mini-displayport output.

device ID and subsystem ID is as follows.

0f:00.0 VGA compatible controller [0300]: ATI Technologies Inc Unknown device [1002:688a] (prog-if 00 [VGA controller])
Subsystem: ATI Technologies Inc Unknown device [1002:031e]

I added this ID to ATI.C by myself and compiled to get new boot file.
For framebuffer, I did not specified one but set to "Knull".
When booting procedure goes with -V, there displays "Unsupported card!" but it normally boots with default resolution of 1600x1200, which should have been 1920x1200. I can not change screen resolution. When I type "ioreg | grep ATY", nothing happens. In system profiler, Vram is displayed as only 7MB. 

So, I changed default framebuffer in ati.c into "Zonalis(kZonalis)" and compiled to get another boot file. When it boots with -V, bootloader recognizes V9800 almost normally except Vram(0MB). However, even after booting procedure ends, nothing displays in monitor at all.

What can I do next?

Zane

  • Member
  • Posts: 81
Re: ATI/AMD GraphicsEnabler support (legacy, modules & missing devices)!
« Reply #156 on: September 15, 2011, 03:26:00 PM »
@optha72

If you set the value to kNull you obviously will get "Unsupported card!". Azi has mentioned this a number of times in this whole thread that a Framebuffer MUST be set if it's "kNull" or else you will get "Unsupported card!" On another hand. I have the same issue with you as Vram becomes only 7mb when the Framebuffer Kext isn't loaded. Try
Code: [Select]
kextstat

in terminal instead to see what kext's are loaded. I am pretty sure the Framebuffer Kext didn't get loaded. Something i'm not sure why since i believe that even though the Framebuffer Kext isn't loaded, a Framebuffer MUST be set to get display?

You can test all the Framebuffers available or you can follow what i did below and see if that works for you.
Code: [Select]
Alopias
Alouatta
Baboon
Cardinal
Caretta
Colobus
Douc
Eulemur
Flicker
Galago
Gliff
Hoolock
Hypoprion
Iago
Kakapo
Kipunji
Lamna
Langur
Megalodon
Motmot
Nomascus
Orangutan
Peregrine
Quail
Raven
Shrike
Sphyrna
Triakis
Uakari
Vervet
Zonalis
Pithecia
Bulrushes
Cattail
Hydrilla
Duckweed
Fanwort
Elodea
Kudzu
Gibba
Lotus
Ipomoea
Mangabey
Muskgrass
Juncus

Interesting that your vram is detected as 0mb. Not too sure about that.

One more thing, you also don't have to compile the boot file everytime you want to change Framebuffer, just use AtiConfig=Framebufferhere on boot to "select" a different Framebuffer.
http://bit.ly/osx86log Lenovo Y550P OSx86 Log
http://bit.ly/envyosx64log HP Envy 15 1150nr OSx64 log

ophtha72

  • Observer
  • Posts: 12
Re: ATI/AMD GraphicsEnabler support (legacy, modules & missing devices)!
« Reply #157 on: September 15, 2011, 04:06:19 PM »
Thank you for your kind post, Zane.


You can test all the Framebuffers available or you can follow what i did below and see if that works for you.
Code: [Select]
Alopias
Alouatta
Baboon
Cardinal
Caretta
Colobus
Douc
Eulemur
Flicker
Galago
Gliff
Hoolock
Hypoprion
Iago
Kakapo
Kipunji
Lamna
Langur
Megalodon
Motmot
Nomascus
Orangutan
Peregrine
Quail
Raven
Shrike
Sphyrna
Triakis
Uakari
Vervet
Zonalis
Pithecia
Bulrushes
Cattail
Hydrilla
Duckweed
Fanwort
Elodea
Kudzu
Gibba
Lotus
Ipomoea
Mangabey
Muskgrass
Juncus


The reason why I selected "Zonalis" framebuffer was that "Zonalis" is the only framebuffer which has 6 display output.
The other framebuffer which has also 6 display output is "Bulrushes" but it is the one for ATI 6000 series not for 5000 series.
As I mentioned, V9800 has 6 mini-displayport output and HD5870 eyefinity6(which has identical 6 mini-displayport output as V9800) uses "Zonalis" framebuffer usually.
Can I try other framebuffer which is the one for three to five display output?
Or can I try "Bulrushes" framebuffer which is one for 6000 series?
V9800 has same cypress chipset as ATI HD5870.

The name, number of output and kind of output of framebuffers is as follows.

{"Colobus",   2}, // 5000 - lvds, dp
{"Douc",   2}, // 5000 - lvds, dp
{"Eulemur",   3}, // 5000 - dvi-i dl, hdmi, vga
{"Galago",   2}, // 5000 - lvds, dp
{"Hoolock",   3}, // 5000 - dp, dp, dvi-i dl
{"Langur",   3}, // 5000 - dp, dp, dvi-i dl
{"Nomascus",   5}, // 5000 - lvds, lvds, dp, dp
{"Orangutan",   2}, // 5000 - lvds, dp
{"Uakari",   4}, // 5000 - dp, dvi-i dl, dvi-i sl, hdmi
{"Vervet",   4}, // 5000 - dp, dvi-i dl, dvi-i sl, hdmi
{"Alouatta",   4}, // 5000 - lvds, dp, dp, dp
{"Baboon",   3}, // 5000 - dvi-i dl, hdmi, vga
{"Zonalis",   6}, // 5000 - dp, dp, dp, dp, dp, dp
{"Mangabey",   2}, // 5000 - lvds, dp

« Last Edit: September 15, 2011, 04:30:59 PM by ophtha72 »

Zane

  • Member
  • Posts: 81
Re: ATI/AMD GraphicsEnabler support (legacy, modules & missing devices)!
« Reply #158 on: September 15, 2011, 08:15:51 PM »
Actually i'm not too sure how Framebuffer works since the laptop i have has only 2 ports.
One internal and one HDMI as you can see from above about my ATI Rom Decoded.
One of them is LVDS and the other is HDMI.
However, the Hoolock framebuffer works in OS X 10.7.1 and according to the Hoolock framebuffer it's supposed to be " dp, dp, dvi-i dl" 3 ports.
Interestingly no relation to my Laptop at all. But Hoolock is definitely the wrong framebuffer for my card.

I'll let Azi explain to us how the framebuffer actually works incase i missed out on reading something in this whole thread.

EDIT: Also, you might want to try the EDID Fix to see if that works for you. Interestingly it works for me.
http://bit.ly/osx86log Lenovo Y550P OSx86 Log
http://bit.ly/envyosx64log HP Envy 15 1150nr OSx64 log

Azimutz

  • VoodooLabs
  • Posts: 420
  • Paranoid Android
Re: ATI/AMD GraphicsEnabler support (legacy, modules & missing devices)!
« Reply #159 on: September 16, 2011, 02:19:30 PM »
Hi people, i'm back... i think :P

I gave up installing V4800 in hacintosh.
Instead, I got new fire pro graphic controller, V9800. ...

I am struggling to install ATI firepro V9800, which is identical to HD5870 eyefinity6 except memory size(4GB).It has 6 mini-displayport output. ...
ophtha72, you just stabbed me in the heart :( after all we talked, you give up on a supported device id
for a non supported one?!... you better get another card :)
 System & Patches: http://goo.gl/i961
 Chameleon:
- trunk builds: http://goo.gl/9G1Hq
- pref pane: http://goo.gl/OL2UT

Azimutz

  • VoodooLabs
  • Posts: 420
  • Paranoid Android
Re: ATI/AMD GraphicsEnabler support (legacy, modules & missing devices)!
« Reply #160 on: September 16, 2011, 04:05:15 PM »
Actually i'm not too sure how Framebuffer works since the laptop i have has only 2 ports.
One internal and one HDMI as you can see from above about my ATI Rom Decoded.
One of them is LVDS and the other is HDMI.
However, the Hoolock framebuffer works in OS X 10.7.1 and according to the Hoolock framebuffer it's supposed to be " dp, dp, dvi-i dl" 3 ports.
Interestingly no relation to my Laptop at all. But Hoolock is definitely the wrong framebuffer for my card.

I'll let Azi explain to us how the framebuffer actually works incase i missed out on reading something in this whole thread.

EDIT: Also, you might want to try the EDID Fix to see if that works for you. Interestingly it works for me.
Hi Zane... i would love to explain you guys how this fb/ports stuff works, but none of this makes any sense to me...
that is, i have some "theories" but not solid ones.
Indeed, Hoolock doesn't seem the fb for your card, but i've seen weirder; can you try Langur?
Does, hdmi also work with Hoolock?
Also, can you post a bdmesg/ioreg with the card working? :P
 System & Patches: http://goo.gl/i961
 Chameleon:
- trunk builds: http://goo.gl/9G1Hq
- pref pane: http://goo.gl/OL2UT

ophtha72

  • Observer
  • Posts: 12
Re: ATI/AMD GraphicsEnabler support (legacy, modules & missing devices)!
« Reply #161 on: September 16, 2011, 04:43:53 PM »
Hi, Azimutz
Welcome back!! :)

ophtha72, you just stabbed me in the heart :( after all we talked, you give up on a supported device id
for a non supported one?!... you better get another card :)

I am so sorry but that V4800 was not mine but was what I borrowed from my friend.
Because he wanted to get back, I could not try any more.
He said that he could borrow once more about a month later, so I will try once more at that time.
I really appreciate your help and support for me.

By the way, do you have any idea for V9800?
Many HD5870 eyefinity6 users reports that it works successfully with zonalis framebuffer in hackintoch.
The difference between HD5870 and V9800 is only memory size.(2GB in 5870 vs 4GB in V9800)
I don't understand that why V9800 does not work even after I added device IDs to ATI.c.
Here I attached the boot file which I compiled.( I renamed it with boot-kNull.)
Can you check the boot file for me?
I need your advice.
« Last Edit: September 16, 2011, 04:45:27 PM by ophtha72 »

Zane

  • Member
  • Posts: 81
Re: ATI/AMD GraphicsEnabler support (legacy, modules & missing devices)!
« Reply #162 on: September 16, 2011, 09:02:41 PM »
Actually i'm not too sure how Framebuffer works since the laptop i have has only 2 ports.
One internal and one HDMI as you can see from above about my ATI Rom Decoded.
One of them is LVDS and the other is HDMI.
However, the Hoolock framebuffer works in OS X 10.7.1 and according to the Hoolock framebuffer it's supposed to be " dp, dp, dvi-i dl" 3 ports.
Interestingly no relation to my Laptop at all. But Hoolock is definitely the wrong framebuffer for my card.

I'll let Azi explain to us how the framebuffer actually works incase i missed out on reading something in this whole thread.

EDIT: Also, you might want to try the EDID Fix to see if that works for you. Interestingly it works for me.
Hi Zane... i would love to explain you guys how this fb/ports stuff works, but none of this makes any sense to me...
that is, i have some "theories" but not solid ones.
Indeed, Hoolock doesn't seem the fb for your card, but i've seen weirder; can you try Langur?
Does, hdmi also work with Hoolock?
Also, can you post a bdmesg/ioreg with the card working? :P

Done. Used Hoolock. HDMI does not work with Hoolock. One thing to note is that i get a scrambled screen for 1 second before it goes back to proper almost everytime OS X boots. Uploaded the bdmesg and ioreg for both Hoolock and Langur.
« Last Edit: September 16, 2011, 09:07:54 PM by Zane »
http://bit.ly/osx86log Lenovo Y550P OSx86 Log
http://bit.ly/envyosx64log HP Envy 15 1150nr OSx64 log

Azimutz

  • VoodooLabs
  • Posts: 420
  • Paranoid Android
Re: ATI/AMD GraphicsEnabler support (legacy, modules & missing devices)!
« Reply #163 on: September 17, 2011, 12:54:15 AM »
I am so sorry but that V4800 was not mine but was what I borrowed from my friend.
Because he wanted to get back, I could not try any more. ...
aah... ok, in that case the "stab wound" is healed ;D

By the way, do you have any idea for V9800?
Many HD5870 eyefinity6 users reports that it works successfully...
I don't understand that why V9800 does not work even after I added device IDs to ATI.c.
I need your advice.
Let's see if i can explain... Apple's drivers only work with the device ids used by Apple's hardware,
the ones you can find on the info.plist inside the kexts. When the card's dev id is not supported, the only way
to make the drivers work, is by "injecting" the card's device id; this is usually done by editing the driver manually
(e.g. bin patch, plist edit), using another kext (e.g. injector), a kext patcher (e.g. booter module), etc...
Chameleon's GraphicsEnabler is no "injector", contrary to what many people think, and that's why you can't make
e.g. 688a work just by adding the cards info to GE's code; all GE does is write/pass some values to ioreg device tree,
that the drivers expect to find, similar to what can be done with DSDT editing.
Is it more clear now?

Advice... honestly, i don't know. Bin patching the driver is out of question for me, i don't have what it takes,
but theoretically it should work; 6888 is very close to your's
Code: [Select]
{“    ATI FirePro V8800 (FireGL) Graphics Adapter    ,    EvergreenGL    ,    6888    “}
{“    ATI FirePro V9800 (FireGL) Graphics Adapter    ,    EvergreenGL    ,    688A    “}
and it's a supported dev id, so there's probably support for your card in the drivers?!
I also don't know about other patches... maybe Netkas?! check his forum...
Also, your card is pretty recent; there's always the chance of becoming supported :)


did i give you enough info for my card?
Hi brandonb21... yep, info is enough, but the talk above also applies to you.
RadeonX1000 can still be bin patched successfully, not sure if it's worth trying, though?!
« Last Edit: September 17, 2011, 06:59:00 PM by Azimutz »
 System & Patches: http://goo.gl/i961
 Chameleon:
- trunk builds: http://goo.gl/9G1Hq
- pref pane: http://goo.gl/OL2UT

Azimutz

  • VoodooLabs
  • Posts: 420
  • Paranoid Android
Re: ATI/AMD GraphicsEnabler support (legacy, modules & missing devices)!
« Reply #164 on: September 17, 2011, 01:55:25 PM »
Done. Used Hoolock. HDMI does not work with Hoolock. One thing to note is that i get a scrambled screen for 1 second before it goes back to proper almost everytime OS X boots. Uploaded the bdmesg and ioreg for both Hoolock and Langur.
Zane, those ioreg's are useless :P use
Code: [Select]
ioreg -lfw0bdmesg looks ok; just confirm me something...
If you boot without e.g. AtiConfig=Hoolock do you get Nomascus framebuffer?
And the subsys id/ven is correct?

Still, would like to take a look at ioregs...
« Last Edit: September 17, 2011, 05:12:17 PM by Azimutz »
 System & Patches: http://goo.gl/i961
 Chameleon:
- trunk builds: http://goo.gl/9G1Hq
- pref pane: http://goo.gl/OL2UT