Author Topic: Chameleon 2 won't boot Windows 7  (Read 14186 times)

0 Members and 1 Guest are viewing this topic.

macdan

  • Entrant
  • Posts: 2
Chameleon 2 won't boot Windows 7
« on: May 22, 2009, 09:23:04 AM »
I've have 3 partition osx, xp and windows 7.
osx and xp boots, but windows 7 does not.
Can this be fixed?

BladeRunner

  • Member
  • Posts: 88
Re: Chameleon 2 won't boot Windows 7
« Reply #1 on: May 22, 2009, 10:25:48 AM »
I've have 3 partition osx, xp and windows 7.
osx and xp boots, but windows 7 does not.
Can this be fixed?

Is your disk partitioned MBR or GUID?  I ask because on my system, partitioned GUID, Chameleon boots Windows 7 without any problem.
Base system: HP Pavilion P6340f Desktop  Intel� Core2Quad�  CPU: Speed: 2.66 GHz   Package: Socket 775 LGA:  L2 Cache 2 x 2048 KB  RAM : 8.0 GB:  DDR3

Disks : 2 eSATA @ 2 TB (hardware raid 1), NAS 4 x 2 TB raid 5 Display : 21" Samsung on EVGA GeForce 9400 GT - PCIe - 1900x1080  Keyboard/mouse :  USB connected  OS Version : 10.6.0 from retail DVD + SW update to 10.6.5 - Kernel:  Vanilla mach_kernel

macdan

  • Entrant
  • Posts: 2
Re: Chameleon 2 won't boot Windows 7
« Reply #2 on: May 22, 2009, 12:38:57 PM »
My partition is MBR

mani549

  • Entrant
  • Posts: 1
Re: Chameleon 2 won't boot Windows 7
« Reply #3 on: May 23, 2009, 09:47:50 PM »
how can i partition my disk as guid?

BladeRunner

  • Member
  • Posts: 88
Re: Chameleon 2 won't boot Windows 7
« Reply #4 on: May 26, 2009, 05:05:28 PM »
how can i partition my disk as guid?

You didn't say what all is on your disk at the moment.  Or, if you have more than one drive to work with.  Did you use a patched distribution or Retail DVD to install your system.  All of that makes a difference to what the answer is.

If it's just OSX, you have an extra drive and you used retail or the correct distribution then it is rather easy, but time consuming.

You would need enough free space on a second driove before you start.  Boot your system from your installer DVD.  Select the Utilities -> Disk Utility and create backup images of the partitions currently on the drive.  When you have the backup images reboot with the installer DVD.  Again, go to Disk Utility.  Check to see that you could setup and start a restore operation for your OSX partition.  The reason for this is that Disk Utility on some distributions has a bug that prevents getting the restore operation setup correctly.

If everything looks good, use Disk Utility to repartition your drive.  On the panel where you set the partition names and sizes select Options -> GUID and then apply the change.  Then, use Disk Utility to restore your OSX backup image. 

You will also need a copy of the Chameleon boot, boot0 and boot1h files where you can access them from the installer DVD -> Utilities -> Terminal session.  You need to manually install Chameleon using the fdisk, cp and dd commands.  This is required to make the system bootable after the restore. 

See, simple - and time consuming.

Good luck.   
Base system: HP Pavilion P6340f Desktop  Intel� Core2Quad�  CPU: Speed: 2.66 GHz   Package: Socket 775 LGA:  L2 Cache 2 x 2048 KB  RAM : 8.0 GB:  DDR3

Disks : 2 eSATA @ 2 TB (hardware raid 1), NAS 4 x 2 TB raid 5 Display : 21" Samsung on EVGA GeForce 9400 GT - PCIe - 1900x1080  Keyboard/mouse :  USB connected  OS Version : 10.6.0 from retail DVD + SW update to 10.6.5 - Kernel:  Vanilla mach_kernel

Arial

  • Observer
  • Posts: 17
    • Mac-iNUL.com
Re: Chameleon 2 won't boot Windows 7
« Reply #5 on: May 28, 2009, 02:28:03 AM »
I've have 3 partition osx, xp and windows 7.
osx and xp boots, but windows 7 does not.
Can this be fixed?
My partition is MBR
1. set active your Win7 partition
2. boot with Win7 Install DVD, choose Rapair your computer.
bootsector problem will auto-detected and ask you to click button to repair it.
3. set active OSX partition again.
20090831 |  ⌘  on Abit IP35-E | Intel C2D E68