[ VoodooSDHCI ] BETA available now

[Chrysaor]

Is the source for this available?
If not, can you compile it for 10.6 x64?
Thanks.

[DaemonES]

Any chance to get sources? I have full SDHC, MS, XD  specs,  so I suppose I can help with development.

[nil]

Any chance to get sources? I have full SDHC, MS, XD  specs,  so I suppose I can help with development.

Thanks for the interest; however, I will not be releasing the sources until after I make a full stable release with the set of controllers I intend to fully support.  After the initial release I've just sat by watching how the kext had been troubling people in various ways and I've been working on it. 

   Also, I have been busy with VoodooHDA as well so please be patient.  I expect to have a friend (XyZ) test the 10.6 driver and then I will have the latest RC available in x86_64.

thanks for your continued support and interest!  It will be available within the week.

=jt

[knacker]

I just installed it an it works great!  I do not need to reboot to get it to recognize newly inserted cards or anything.  Truly awesome.

Even though I know you asked us not to do this, I did end up having to edit the info.plist to get it working.

My computer is an acer aspire one AOA150 with a JMicron controller.

I know this is  sort of a long shot, but any distant future plans to add MMC/MMCplus support?

[nil]

My computer is an acer aspire one AOA150 with a JMicron controller.

I know this is  sort of a long shot, but any distant future plans to add MMC/MMCplus support?

in the works right now: please provide your pci id that you are using so it can be added to default.

nil

[nerone]

mmc support is what i miss for.

i have the one on my asus laptop:
1180:0843 — Ricoh Co Ltd — R5C843 MMC Host Controller

[knacker]

0x2381197b is for SD.  This is the one that works fine incorporated into info.plist.

0x2382197b seems to be for MMC, but I can't find any device in windows device manager that corresponds to this.  There are two SD host controllers in device manager:  One that says "SD Host Controller" and one that says "SD/MMC Host Controller".  Both of them use the same 0x2381197b ID. I'm pretty sure that 0x2382197b corresponds to MMC, though, since the driver crashes when this ID is entered into Info.plist and I insert an MMC card; it doesn't do anything otherwise.

[ole2]

EDIT :: CALLING ALL RICOH TESTERS! 

hello Nil
your build dated on july isn't really working on my Toshiba SD card reader.
do you have source code of your project hosted somewhere?
I'd like to participate in debugging it.
thanks
Ole2

[launchcontrol]

Not working for me. Hope the following can help to improve the final release.

Ricoh Memory Card Reader (on a Lenovo T400 laptop)
VEN 1180
DEV 0843 (SD/SDHC) 0476 (Main)
*Green light goes on and off when inserting a sd and sdhc cards

Testing on 10.6.1

[Rikoshet]

Hi Nil! Is it possible to add support for O2 devices?

01:04.2 SD Host controller [0805]: O2 Micro, Inc. Integrated MMC/SD Controller [1217:7120] (rev 02)
01:04.3 Mass storage controller [0180]: O2 Micro, Inc. Integrated MS/xD Controller [1217:7130] (rev 01)
 Or may be make an editable Info.plist? Would be much easyer for us with unsupported chips!
Thank you!

[wsw]

Thanks for briliant work nil!
There will be any chance to support ENE chipset?

00:09.0 FLASH memory [0501]: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller [1524:0730]
00:09.1 SD Host controller [0805]: ENE Technology Inc ENE PCI SmartMedia / xD Card Reader Controller [1524:0750]
00:09.3 FLASH memory [0501]: ENE Technology Inc ENE PCI Secure Digital / MMC Card Reader Controller [1524:0751]

Thanks in advance.
Regards..

It will be great! I will wait too. Or there is a other variant?

[lunio666]

not works on my Acer 5930g