2

Author Topic: [ VoodooSDHCI ] BETA available now  (Read 55229 times)

0 Members and 1 Guest are viewing this topic.

Chrysaor

  • Entrant
  • Posts: 2
Re: [ VoodooSDHCI ] BETA available now
« Reply #15 on: September 12, 2009, 02:39:27 AM »
Is the source for this available?
If not, can you compile it for 10.6 x64?
Thanks.

DaemonES

  • Entrant
  • Posts: 1
Re: [ VoodooSDHCI ] BETA available now
« Reply #16 on: September 20, 2009, 03:54:32 PM »
Any chance to get sources? I have full SDHC, MS, XD  specs,  so I suppose I can help with development.

nil

  • VoodooLabs
  • Posts: 15
Re: [ VoodooSDHCI ] BETA available now
« Reply #17 on: September 20, 2009, 04:53:46 PM »
Any chance to get sources? I have full SDHC, MS, XD  specs,  so I suppose I can help with development.

Thanks for the interest; however, I will not be releasing the sources until after I make a full stable release with the set of controllers I intend to fully support.  After the initial release I've just sat by watching how the kext had been troubling people in various ways and I've been working on it. 

   Also, I have been busy with VoodooHDA as well so please be patient.  I expect to have a friend (XyZ) test the 10.6 driver and then I will have the latest RC available in x86_64.

thanks for your continued support and interest!  It will be available within the week.

=jt

knacker

  • Entrant
  • Posts: 3
Re: [ VoodooSDHCI ] BETA available now
« Reply #18 on: September 26, 2009, 03:57:46 AM »
I just installed it an it works great!  I do not need to reboot to get it to recognize newly inserted cards or anything.  Truly awesome.

Even though I know you asked us not to do this, I did end up having to edit the info.plist to get it working.

My computer is an acer aspire one AOA150 with a JMicron controller.

I know this is  sort of a long shot, but any distant future plans to add MMC/MMCplus support?

nil

  • VoodooLabs
  • Posts: 15
Re: [ VoodooSDHCI ] BETA available now
« Reply #19 on: October 21, 2009, 03:23:01 AM »
My computer is an acer aspire one AOA150 with a JMicron controller.

I know this is  sort of a long shot, but any distant future plans to add MMC/MMCplus support?

in the works right now: please provide your pci id that you are using so it can be added to default.

nil

nerone

  • Entrant
  • Posts: 3
Re: [ VoodooSDHCI ] BETA available now
« Reply #20 on: October 24, 2009, 10:31:52 PM »
mmc support is what i miss for.

i have the one on my asus laptop:
1180:0843 — Ricoh Co Ltd — R5C843 MMC Host Controller

knacker

  • Entrant
  • Posts: 3
Re: [ VoodooSDHCI ] BETA available now
« Reply #21 on: October 25, 2009, 03:17:06 PM »
0x2381197b is for SD.  This is the one that works fine incorporated into info.plist.

0x2382197b seems to be for MMC, but I can't find any device in windows device manager that corresponds to this.  There are two SD host controllers in device manager:  One that says "SD Host Controller" and one that says "SD/MMC Host Controller".  Both of them use the same 0x2381197b ID. I'm pretty sure that 0x2382197b corresponds to MMC, though, since the driver crashes when this ID is entered into Info.plist and I insert an MMC card; it doesn't do anything otherwise.
« Last Edit: October 25, 2009, 03:56:16 PM by knacker »

ole2

  • Entrant
  • Posts: 3
Re: [ VoodooSDHCI ] BETA available now
« Reply #22 on: October 27, 2009, 01:24:48 PM »
EDIT :: CALLING ALL RICOH TESTERS! 

hello Nil
your build dated on july isn't really working on my Toshiba SD card reader.
do you have source code of your project hosted somewhere?
I'd like to participate in debugging it.
thanks
Ole2

launchcontrol

  • Entrant
  • Posts: 1
Re: [ VoodooSDHCI ] BETA available now
« Reply #23 on: November 07, 2009, 11:22:16 PM »
Not working for me. Hope the following can help to improve the final release.

Ricoh Memory Card Reader (on a Lenovo T400 laptop)
VEN 1180
DEV 0843 (SD/SDHC) 0476 (Main)
*Green light goes on and off when inserting a sd and sdhc cards

Testing on 10.6.1

Rikoshet

  • Entrant
  • Posts: 4
Re: [ VoodooSDHCI ] BETA available now
« Reply #24 on: November 17, 2009, 10:18:57 PM »
Hi Nil! Is it possible to add support for O2 devices?

01:04.2 SD Host controller [0805]: O2 Micro, Inc. Integrated MMC/SD Controller [1217:7120] (rev 02)
01:04.3 Mass storage controller [0180]: O2 Micro, Inc. Integrated MS/xD Controller [1217:7130] (rev 01)
 Or may be make an editable Info.plist? Would be much easyer for us with unsupported chips!
Thank you!
« Last Edit: November 29, 2009, 09:56:57 PM by Rikoshet »

wsw

  • Entrant
  • Posts: 1
Re: [ VoodooSDHCI ] BETA available now
« Reply #25 on: February 19, 2010, 08:46:46 AM »
Thanks for briliant work nil!
There will be any chance to support ENE chipset?

00:09.0 FLASH memory [0501]: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller [1524:0730]
00:09.1 SD Host controller [0805]: ENE Technology Inc ENE PCI SmartMedia / xD Card Reader Controller [1524:0750]
00:09.3 FLASH memory [0501]: ENE Technology Inc ENE PCI Secure Digital / MMC Card Reader Controller [1524:0751]

Thanks in advance.
Regards..

It will be great! I will wait too. Or there is a other variant?

lunio666

  • Entrant
  • Posts: 1
Re: [ VoodooSDHCI ] BETA available now
« Reply #26 on: February 19, 2010, 03:57:28 PM »
not works on my Acer 5930g  >:(

MrCabana

  • Entrant
  • Posts: 1
Re: [ VoodooSDHCI ] BETA available now
« Reply #27 on: March 22, 2010, 01:55:43 AM »
Not working on Acer Aspire 5720. After installing this, mouse (usb and pad) and keyboard stop working when i put a SD card in the slot.
My hardware is Ricoh Co Ltd. (1180:0822) R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter.
SL 10.6.2.

mjoosborn

  • Entrant
  • Posts: 1
Re: [ VoodooSDHCI ] BETA available now
« Reply #28 on: April 03, 2010, 05:51:27 PM »
using 10.5.8 on compaq 2510p.
Was able to get it installed and show up in ioreg

 |
    | |   |   | +-o VoodooSDHC  <class VoodooSDHC, registered, matched, active, busy 0, retain 6>
    | |   |   |   | {
    | |   |   |   |   "IOProbeScore" = 0x0
    | |   |   |   |   "IOMaximumSegmentCountRead" = 0x20
    | |   |   |   |   "IOMaximumSegmentCountWrite" = 0x20
    | |   |   |   |   "CFBundleIdentifier" = "VoodooSDHC"
    | |   |   |   |   "IOPCIMatch" = "0x08221180"
    | |   |   |   |   "IOMinimumSegmentAlignmentByteCount" = 0x4
    | |   |   |   |   "IOMatchCategory" = "IODefaultMatchCategory"
    | |   |   |   |   "IOPowerManagement" = {"CurrentPowerState"=0x1}
    | |   |   |   |   "IOMaximumBlockCountRead" = 0x10000
    | |   |   |   |   "IOProviderClass" = "IOPCIDevice"
    | |   |   |   |   "device-type" = "Generic"
    | |   |   |   |   "IOMaximumBlockCountWrite" = 0x40
    | |   |   |   |   "IOClass" = "VoodooSDHC"
    | |   |   |   | }


But does not mount anything?
Any suggestions?

Tobi

  • Entrant
  • Posts: 1
Re: [ VoodooSDHCI ] BETA available now
« Reply #29 on: May 02, 2010, 02:33:59 PM »
Worked just One time for me with SD card..


Now tell me VoodooSDHCI: failed to create an interrupt source

Thanks