overdue-scratch

Author Topic: EBIOS read error: Error 0x01 [SOLVED]  (Read 41429 times)

0 Members and 1 Guest are viewing this topic.

trexplorer

  • Entrant
  • Posts: 5
Re: EBIOS read error: Error 0x01
« Reply #15 on: August 25, 2009, 09:41:33 PM »
Hopefully the >1TB addressing issue is fixed by now :)

Are you suggesting chameleon has been updated to address this issue ...  ???

cheers.

Kabyl

  • VoodooLabs
  • Posts: 158
Re: EBIOS read error: Error 0x01
« Reply #16 on: August 25, 2009, 10:14:41 PM »
Are you suggesting chameleon has been updated to address this issue ...  ???

cheers.

No, it will be in the next release.

trexplorer

  • Entrant
  • Posts: 5
Re: EBIOS read error: Error 0x01
« Reply #17 on: September 17, 2009, 11:53:54 PM »
thanks - RC3 works great ....

joe139

  • Entrant
  • Posts: 1
Re: EBIOS read error: Error 0x01 [SOLVED]
« Reply #18 on: September 24, 2013, 07:21:39 PM »
I can't necessarily say I have solved this problem. But, it is "fixed" for now on my machine. I have a multi-boot Win7, multi-partition system with SL, Lion and Mt Lion and installer partitions running. I started to get this EBIOS error everything. First, I reset the mb bios, then turned off/on the legacy usb with differnet boots. Nothing.

Then I noticed I had a Canon scanner/printer usb plugged in at boot and showing up in the boot setup list. It had been plugged in and "on" when I tested a installer usb. That is when it all started for me.

I turned off the printer and all devices and the EBIOS boot error went away. Simple as that... I suspect this has something to do with non-bootable usb devices being plugged in at boot. Thought I'd share.  :)