overdue-scratch

Author Topic: smbios.plist memory settings are not applied  (Read 3990 times)

0 Members and 1 Guest are viewing this topic.

FrodoKenny

  • Observer
  • Posts: 10
smbios.plist memory settings are not applied
« on: August 03, 2009, 08:14:42 PM »
RC2 is great, however it seems my memory setting from smbios.plist are not applied.
My smbios.plist look like this:
Code: [Select]
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
        <key>SMbiosversion</key>
        <string>MM11.88Z.0055.B08.0610121326</string>
        <key>SMmanufacter</key>
        <string>Apple Inc.</string>
        <key>SMproductname</key>
        <string>MacMini1,1</string>
        <key>SMsystemversion</key>
        <string>1.1</string>
        <key>SMserial</key>
        <string>YM6094QPU36</string>
        <key>SMexternalclock</key>
        <string>133</string>
        <key>SMmaximalclock</key>
        <string>2400</string>
        <key>SMmemtype</key>
        <string>18</string>
        <key>SMmemspeed</key>
        <string>133</string>
        <key>SMmemmanufacter_1</key>
        <string>Dane-Elec</string>
        <key>SMmemserial_1</key>
        <string>0x00001020</string>
        <key>SMmempart_1</key>
        <string>0x48594D503131325336344350362D59352020</string>
        <key>SMmemmanufacter_2</key>
        <string>Dane-Elec</string>
        <key>SMmemserial_2</key>
        <string>0x00003021</string>
        <key>SMmempart_2</key>
        <string>0x48594D503131325336344350362D59352020</string>
        <key>SMmemmanufacter_3</key>
        <string>Dane-Elec</string>
        <key>SMmemserial_3</key>
        <string>0x00003021</string>
        <key>SMmempart_3</key>
        <string>0x48594D503131325336344350362D59352020</string>
</dict>
</plist>

After the smbios.plist my machine is shown as a Mac Mini with the correct bus speed, but whatever I put for the memory stuff it always shows unknown speed, manufacturer, part number and serial number in System Profiler as in the attached screenshot. I think this also causes "About This Mac" to crash.
Am I doing something wrong?