Author Topic: Loads But Doesn't Attach  (Read 2616 times)

0 Members and 1 Guest are viewing this topic.


  • Observer
  • Posts: 15
Loads But Doesn't Attach
« on: August 07, 2009, 03:30:12 AM »

Hi I have a TI:

04:09.2 Mass storage controller [0180]: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) [104c:803b]

VoodooSDHCI loads (manually, not from /S/L/E. Kextload -v 6 gives all the details, and 10 personalities are sent to the kernel:

kextload: kmod name: VoodooSDHC
kextload: kmod start @ 0x36c9551a (offset 0x28da)
kextload: kmod stop @ 0x36c9555d (offset 0x291d)
kextload: module VoodooSDHC created as # 112 at address 0x36c92000, size 20480
kextload: sending 10 personalities to the kernel
kextload: matching started for VoodooSDHC.kext

But it doesn't attach. I've verified that with ioreg. Let me know if you need the ioreg.

I'm a programmer, fluent in C+/Obj-C, bash, Linux etc. So if you need me to do anything, let me know. I also have access to another machine with an O2 Micro card. So I can test/develop there too.

Would appreciate if you could point me to any available source or debug kext.
Thanks for putting this together.


P.S. If by chance you do edit the plist (I'd forgotten your admonition against doing that), the kext hard crashes the machine.