overdue-scratch

Author Topic: ICH10 ALC888  (Read 3691 times)

0 Members and 1 Guest are viewing this topic.

AppleIIGuy

  • Observer
  • Posts: 15
ICH10 ALC888
« on: August 19, 2009, 07:35:01 AM »
Unable to get 5.1 audio only audio out is on Green audio port. Tested all mini jacks and Coax spdif
Ports listed:
Unknown
Headphones
SPDIF-out Does not say if optical or digital

Audio Midi Setup only lists stereo as a option.

I have attached the dump from voodoo

qckslvrguyinkc

  • Entrant
  • Posts: 4
Re: ICH10 ALC888
« Reply #1 on: August 27, 2009, 02:49:04 AM »
Hi, I have a similar issue with my new board. I couldn't get any of Taruga's stuff to work with it, but VoodooHDA at least gives me stereo audio...through all of the audio out ports (basically, I have 4 sets of stereo output). Headphone port also works, but has to be set manually. Mic/Line in ports don't work (line in isn't even detected) and S/PDIF output (coax or optical) don't work either (and even have some insane output options, like 32-bit 192khz audio).

Audio MIDI lists 2 Mic ins and a S/PDIF in, and Unknown (which is rear audio), Headphones, and S/PDIF output. The board is a Gigabyte EP43-DS3L, which I understand is very, very similar to the EP45-DS3L (only difference being the number of PCI-e channels from the chipset and a second x16 slot). Running Mac OS X 10.5.8 Vanilla with chameleon bootloader.

AppleIIGuy

  • Observer
  • Posts: 15
Re: ICH10 ALC888
« Reply #2 on: August 27, 2009, 03:26:01 AM »
I only get Stereo out on the green port