« previous next »
Pages: 1 [2]

Author Topic: [ VoodooSDHC ] 32/64 bit build  (Read 11544 times)

0 Members and 2 Guests are viewing this topic.

moly82

  • Entrant
  • Posts: 3
Re: [ VoodooSDHC ] 32/64 bit build
« Reply #15 on: February 28, 2010, 01:43:23 AM »
hi guys and thanks for your work. it seems it does not work here, even if my sd card reader seems to be quite common and working for others.. the kext loads but nothing happens when I insert a SD card :( please help me ..

running 10.6.2 hazard, tried both 32 and 64 bit modes.. same result

kextstat:
Code: [Select]
moly:~ Moly$ kextstat  | grep SDH
   83    0 0x45bf3000 0x7000     0x6000     VoodooSDHC (1.1d1) <19 14 5 4 3>


lspci:
Code: [Select]
44:06.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 05)
44:06.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 22)
44:06.2 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller [1180:0843] (rev 12)


any suggestion please?

thanks, bye
« Last Edit: February 28, 2010, 01:44:55 AM by moly82 »
Logged

moly82

  • Entrant
  • Posts: 3
Re: [ VoodooSDHC ] 32/64 bit build
« Reply #16 on: March 04, 2010, 08:14:34 AM »
nobody can help me? please is one of the last things that remain to fix here.. :(
Logged

DutchNeb58

  • Observer
  • Posts: 15
Re: [ VoodooSDHC ] 32/64 bit build
« Reply #17 on: March 04, 2010, 04:09:21 PM »
I'd like it if there was some user interface that, when it doesn't work, would allow us to help troubleshoot...like a debug mode. That would help keep us noobs from bothering the pro's until we have exhausted our options with documentation and an interface.

This software never worked for me, but there wasn't really any direction to turn to try and get it to work either.
Logged

sparkythewondersquid

  • Entrant
  • Posts: 6
Re: [ VoodooSDHC ] 32/64 bit build
« Reply #18 on: May 25, 2010, 08:53:01 AM »
When I install to System/library/Extensions system slows down when SD card inserted I tried to install into Extera/Extensions and system would not boot in -v boot there was a firewire error and boot could not continue I checked the info.plist and the device ID's match so, unfortunately it does not work for me  :( 
Logged

NoFiero

  • Entrant
  • Posts: 1
Re: [ VoodooSDHC ] 32/64 bit build
« Reply #19 on: June 01, 2010, 03:29:36 AM »
Has anyone had success in getting this to work with a Texas Instruments 5 in 1 reader? I can load the kext and see it in kextstat but it will not see a card
Logged

Z3r0

  • Observer
  • Posts: 14
Re: [ VoodooSDHC ] 32/64 bit build
« Reply #20 on: July 14, 2010, 04:24:46 PM »
Same issue, I have a 5-in-1 Texas Instrument, kext loads, but nothing happens when I put a card...

Code: [Select]
0c:04.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
0c:04.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller
0c:04.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
0c:04.3 SD Host controller: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller
Please add support for this reader =)
Logged

niels

  • Entrant
  • Posts: 1
Re: [ VoodooSDHC ] 32/64 bit build
« Reply #21 on: July 22, 2010, 11:51:02 AM »
Works on my HP DV6700 Snow Leopard 10.6.4 32 BIT

09:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
09:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
09:09.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
09:09.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
09:09.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
Logged
Pages: 1 [2]
« previous next »