VoodooSDHCI > General Discussion

[ VoodooSDHC ] x86_64 extention

<< < (2/3) > >>

donkey:

--- Quote from: donkey on October 26, 2009, 05:37:31 AM ---
--- Quote from: donkey on October 19, 2009, 07:34:01 AM ---Thank You!!

--- End quote ---

Tested on regular and HC, no probs so far...

Thanks again!

--- End quote ---

Been using this since release. Works great!

PolishOX:
Great to see a new Voodoo Project making hacks more feature rich!

Toshiba U205-S5002

--- Quote ---00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02)
02:00.0 Network controller: Broadcom Corporation BCM4312 802.11a/b/g (rev 01)
03:08.0 Ethernet controller: Intel Corporation PRO/100 VE Network Connection (rev 02)
03:0b.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
03:0b.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller
03:0b.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
03:0b.3 SD Host controller: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller

--- End quote ---

Looking forward to seeing further developments.

smith@@:
Any news for Texas Instruments?  The kext load, but nothing happened also adding the right id, i have see that it's a common problem for  TI and this kext...


--- Code: ---03:0b.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
--- End code ---

pci104c,803b

Snow Leopard 32

peter_sm:
Can it be possible to get JMB38X MS Host Controller worjing under OSX ?

bisk:
Doesn't work on my HP6910p running vanilla SL 10.6.8.

My SD reader is the same as the default entry in Info.plist ...

02:06.3 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 20)
02:06.4 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller [1180:0843] (rev 10)

I can see a new StorageDevice stub properly attached to the appropriate device id in the IORegistry but when I insert an sD card, no new device is recognized to mount.

This is the exact behavior that I get with IOSDHCIBlockDevice.kextfc1 and is the same whether installed in /E/E or /S/L/E.

Bummer, cuz' everything else works except that I do still need to get the CPU cooling better.

Navigation

[0] Message Index

[#] Next page

[*] Previous page