overdue-scratch

Author Topic: [ VoodooSDHC ] 32/64 bit build  (Read 111048 times)

0 Members and 1 Guest are viewing this topic.

moly82

  • Entrant
  • Posts: 3
Re: [ VoodooSDHC ] 32/64 bit build
« Reply #15 on: February 28, 2010, 01:43:23 AM »
hi guys and thanks for your work. it seems it does not work here, even if my sd card reader seems to be quite common and working for others.. the kext loads but nothing happens when I insert a SD card :( please help me ..

running 10.6.2 hazard, tried both 32 and 64 bit modes.. same result

kextstat:
Code: [Select]
moly:~ Moly$ kextstat  | grep SDH
   83    0 0x45bf3000 0x7000     0x6000     VoodooSDHC (1.1d1) <19 14 5 4 3>


lspci:
Code: [Select]
44:06.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 05)
44:06.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 22)
44:06.2 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller [1180:0843] (rev 12)



any suggestion please?

thanks, bye
« Last Edit: February 28, 2010, 01:44:55 AM by moly82 »

moly82

  • Entrant
  • Posts: 3
Re: [ VoodooSDHC ] 32/64 bit build
« Reply #16 on: March 04, 2010, 08:14:34 AM »
nobody can help me? please is one of the last things that remain to fix here.. :(

DutchNeb58

  • Observer
  • Posts: 15
Re: [ VoodooSDHC ] 32/64 bit build
« Reply #17 on: March 04, 2010, 04:09:21 PM »
I'd like it if there was some user interface that, when it doesn't work, would allow us to help troubleshoot...like a debug mode. That would help keep us noobs from bothering the pro's until we have exhausted our options with documentation and an interface.

This software never worked for me, but there wasn't really any direction to turn to try and get it to work either.

sparkythewondersquid

  • Observer
  • Posts: 21
Re: [ VoodooSDHC ] 32/64 bit build
« Reply #18 on: May 25, 2010, 08:53:01 AM »
When I install to System/library/Extensions system slows down when SD card inserted I tried to install into Extera/Extensions and system would not boot in -v boot there was a firewire error and boot could not continue I checked the info.plist and the device ID's match so, unfortunately it does not work for me  :( 

NoFiero

  • Entrant
  • Posts: 1
Re: [ VoodooSDHC ] 32/64 bit build
« Reply #19 on: June 01, 2010, 03:29:36 AM »
Has anyone had success in getting this to work with a Texas Instruments 5 in 1 reader? I can load the kext and see it in kextstat but it will not see a card

Z3r0

  • Observer
  • Posts: 15
Re: [ VoodooSDHC ] 32/64 bit build
« Reply #20 on: July 14, 2010, 04:24:46 PM »
Same issue, I have a 5-in-1 Texas Instrument, kext loads, but nothing happens when I put a card...

Code: [Select]
0c:04.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
0c:04.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller
0c:04.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
0c:04.3 SD Host controller: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller

Please add support for this reader =)

niels

  • Entrant
  • Posts: 1
Re: [ VoodooSDHC ] 32/64 bit build
« Reply #21 on: July 22, 2010, 11:51:02 AM »
Works on my HP DV6700 Snow Leopard 10.6.4 32 BIT

09:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
09:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
09:09.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
09:09.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
09:09.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)

jpcxc

  • Entrant
  • Posts: 5
Re: [ VoodooSDHC ] 32/64 bit build
« Reply #22 on: August 01, 2010, 09:14:48 AM »
Works on my lenovo y410 t2390 with Snow Leopard, but it sometimes will cause the system gets stuck, not kernel panic, so I have to press the power button long.
« Last Edit: August 01, 2010, 09:17:05 AM by jpcxc »

sparkythewondersquid

  • Observer
  • Posts: 21
Re: [ VoodooSDHC ] 32/64 bit build
« Reply #23 on: September 16, 2010, 05:58:31 AM »
I updated to 10.6.5 (build 10H535) and thought I would give this another try I installed to Extra/Extensions and used the new version of kext utility to rebuild extensions.mkext and its working fine so far on SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) so I will hope for the best:) Thank You!

Aglo

  • Entrant
  • Posts: 1
Re: [ VoodooSDHC ] 32/64 bit build
« Reply #24 on: October 26, 2010, 10:38:58 PM »
My specs:

Asus U3s:
CPU=T7500(64bit)
RAM=2.5GB

Card Reader:   
Code: [Select]
08:03.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 22)
08:03.2 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller [1180:0843] (rev 12)
08:03.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 12)
08:03.4 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev 12)

OSX: SnowLeopard 10.6.4

Kernel:

qoopz 10.4.0(32bit)=flawless
qoopz 10.3.0(64bit)=flawless

qoopz 10.3.0(32bit)=don't work work (I booted with the flag "-f" and the kext loaded fine)
when it did not work :) :
Quote
bootlog:
Code: [Select]
VoodooSDHCI: failed to create an interrupt sourcekextstat:
Code: [Select]
81    0 0x3fee3000 0x7000     0x6000     VoodooSDHC (1.1d1) <20 14 5 4 3>

something is wrong i the land of Job :)...

Thx for the good work :)...
« Last Edit: October 27, 2010, 03:12:49 AM by Aglo »

jzhang18

  • Entrant
  • Posts: 1
Re: [ VoodooSDHC ] 32/64 bit build
« Reply #25 on: December 08, 2011, 09:24:40 PM »
it works under Lion 10.7.2 ;D, with some minor flaws,
unzip VoodooSDHC_32or64.kext.zip, install it with KextBeast, then run Kext Utility to refresh system cache.
some minor issues are observed:
Booting Lion with SD card inserted, I saw 2 mounted volumes of SD card :o. ejecting only one volume might crash OS. better to eject them all.
Sometime, it might slow down shutdown process with SD inside card reader (booting seems OK).
I tested 150x 4GB SD card and 133x 4GB SDHC, Class-6 16GB SDHC -- 3 cards
All work, I put AVCHD MTS video files on SD card, play it with VLC or Roxio Video Palyer, speed is acceptable! (some frames dropped, but OK, both cores of my T8300 went 98%, MTS file needs heavy decompression for every video frame during playback) ;).
_________________
X61 T8300 8GB RAM 64GB Kingston SSD Lion 10.7.2
X61T L7500 4GB RAM 40GB Intel SSD Lion 10.7.2
Dell Mini9 2GB RAM 16GB SSD Snow Leopard 10.6.8
X200 P8600 8GB 64GB Corsair SSD Windows 7 Enterprise 64bit
GA-P55-USB3 Intel i5 750 16GB RAM Lion/Snow Leopard Server/Windows 7

lbuisson

  • Entrant
  • Posts: 1
Re: [ VoodooSDHC ] 32/64 bit build
« Reply #26 on: January 07, 2012, 02:48:22 PM »
Hi

it is not working with SD card reader on Lenovo x121e :(

Somebody can help me?

mid890

  • Entrant
  • Posts: 1
Re: [ VoodooSDHC ] 32/64 bit build
« Reply #27 on: January 11, 2012, 12:28:44 AM »
thx

Blackforest

  • Entrant
  • Posts: 1
Re: [ VoodooSDHC ] 32/64 bit build
« Reply #28 on: January 24, 2012, 06:34:07 AM »
Not working on Sager NP8310. Can someone make this work for my laptop?

bisk

  • Entrant
  • Posts: 5
    • Maui Vacation Rentals
Re: [ VoodooSDHC ] 32/64 bit build
« Reply #29 on: March 20, 2012, 09:52:33 PM »
Doesn't work on my HP6910p running vanilla SL 10.6.8 - 32 bit.

My SD reader is the same as the default entry in Info.plist ...

02:06.3 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 20)
02:06.4 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller [1180:0843] (rev 10)

I can see a new StorageDevice stub properly attached to the appropriate device id in the IORegistry but when I insert an sD card, no new device is recognized to mount.

This is the exact behavior that I get with IOSDHCIBlockDevice.kextfc1 and is the same whether installed in /E/E or /S/L/E.

Bummer, cuz' everything else works except that I do still need to get the CPU cooling better.

bisk