Voodooprojects
VoodooSDHCI => General Discussion => Topic started by: nil on October 11, 2009, 12:59:08 AM
-
Report bugs!
Performance enhancements added.
No new cards added yet; to come at a later date.
GET IT FROM THE ATTACHMENT BELOW
-
Thanks ;D
-
Thank You!!
-
Thank You!!
Tested on regular and HC, no probs so far...
Thanks again!
-
Thanks much :)
-
Thank You!!
Tested on regular and HC, no probs so far...
Thanks again!
Been using this since release. Works great!
-
Great to see a new Voodoo Project making hacks more feature rich!
Toshiba U205-S5002
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02)
02:00.0 Network controller: Broadcom Corporation BCM4312 802.11a/b/g (rev 01)
03:08.0 Ethernet controller: Intel Corporation PRO/100 VE Network Connection (rev 02)
03:0b.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
03:0b.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller
03:0b.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
03:0b.3 SD Host controller: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller
Looking forward to seeing further developments.
-
Any news for Texas Instruments? The kext load, but nothing happened also adding the right id, i have see that it's a common problem for TI and this kext...
03:0b.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
pci104c,803b
Snow Leopard 32
-
Can it be possible to get JMB38X MS Host Controller worjing under OSX ?
-
Doesn't work on my HP6910p running vanilla SL 10.6.8.
My SD reader is the same as the default entry in Info.plist ...
02:06.3 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 20)
02:06.4 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller [1180:0843] (rev 10)
I can see a new StorageDevice stub properly attached to the appropriate device id in the IORegistry but when I insert an sD card, no new device is recognized to mount.
This is the exact behavior that I get with IOSDHCIBlockDevice.kextfc1 and is the same whether installed in /E/E or /S/L/E.
Bummer, cuz' everything else works except that I do still need to get the CPU cooling better.
-
Hello everyone,
I put in VoodooSDHC' plist my id pci10ec, 5209
The reader is Realtek, I get is this:
VoodooSDHC ::: an SDHC driver for Ricoh, TI, and JMicron SD Host Controllers ::: rev 20110208
VoodooSDHC: initializing SD host controller
VoodooSDHC: running start()
VoodooSDHC: we have found 1 SD Host Controllers
VoodooSDHC: dump PCI
(00)=520910ec (04)=00100007 (08)=ff000001 (0c)=00000010
(10)=c3500000 (14)=00000000 (18)=00000000 (1c)=00000000
(20)=00000000 (24)=00000000 (28)=00000000 (2c)=3389103c
(30)=ffff0000 (34)=00000040 (38)=00000000 (3c)=00000112
(40)=77c35001 (44)=00000000 (48)=00000000 (4c)=00000000
(50)=00807005 (54)=fee00000 (58)=00000000 (5c)=00004097
(60)=00000000 (64)=00000000 (68)=00000000 (6c)=00000000
(70)=00020010 (74)=05908700 (78)=00092010 (7c)=00077c11
(80)=10110140 (84)=00000000 (88)=00000000 (8c)=00000000
(90)=00000000 (94)=00000010 (98)=00000000 (9c)=00000000
(a0)=00000000 (a4)=00000000 (a8)=00000000 (ac)=00000000
(b0)=00000000 (b4)=00000000 (b8)=00000000 (bc)=00000000
(c0)=00000000 (c4)=00000000 (c8)=00000000 (cc)=00000000
(d0)=00000000 (d4)=00000000 (d8)=00000000 (dc)=00000000
(e0)=00000000 (e4)=00000000 (e8)=00000000 (ec)=00000000
(f0)=00000000 (f4)=00000000 (f8)=00000000 (fc)=00000000
VoodooSDHC: starting card power management
VoodooSDHC: controller slot == 0
VoodooSDHC: Register Dump ******************************************************
VoodooSDHC: SDMASysAddr: 0x00000000 PresentState: 0x00000000
VoodooSDHC: BlockSize: 0x0000 BlockCount: 0x0000
VoodooSDHC: TransferMode: 0x0000 Command: 0x0000
VoodooSDHC: HostControl: 0x00 PowerControl: 0x00
VoodooSDHC: BlockGapControl: 0x00 WakeupControl: 0x00
VoodooSDHC: ClockControl: 0x0000 TimeoutControl: 0x00
VoodooSDHC: SoftwareReset: 0x00 NormalIntStatus: 0x0000
VoodooSDHC: ErrorIntStatus: 0x0000 NormalIntStatusEn: 0x0000
VoodooSDHC: ErrorIntStatusEn: 0x0000 NormalIntSignalEn: 0x0000
VoodooSDHC: ErrorIntSignalEn: 0x0000 CMD12ErrorStatus: 0x0000
VoodooSDHC: Capabilities[1]: 0x00000000 Capabilities[0]: 0x00000000
VoodooSDHC: MaxCurrentCap[1]: 0x00000000 MaxCurrentCap[0]: 0x00000000
VoodooSDHC: ForceEventCMD12ErrStatus: 0x0000 ForceEventErrorIntStatus: 0x0000
VoodooSDHC: AMDAErrorStatus: 0x00 Argument 0x00000000
VoodooSDHC: ADMASystemAddr[1]: 0x00000000 ADMASystemAddr[0]: 0x00000000
VoodooSDHC: SlotIntStatus: 0x0000 HostControllerVer: 0x0000
PXHCD 0xffffff80f0e70000:UIMInitialize xHC addressing capability 64 bit register
VoodooSDHC: Response[1]: 0x01000000 Response[0]: 0x3e3b001f
PXHCD 0xffffff80f0e70000:UIMInitialize HCSParams2 = 0x11
PXHCD 0xffffff80f0e70000:UIMInitialize MAX SCRATCH PAD = 0
VoodooSDHC: Response[3]: 0x00000000 Response[2]: 0x00000000
VoodooSDHC: End of Register Dump************************************************
AppleIntelCPUPowerManagement: Turbo Ratios 6689
AppleIntelCPUPowerManagement: (built 18:56:37 Jan 12 2012) initialization complete
mbinit: done [96 MB total pool size, (64/32) split]
Pthread support ABORTS when sync kernel primitives misused
VoodooSDHC: wakeup requested with state 2
VoodooSDHC: reportRemovability
VoodooSDHC: controller slot == 0
VoodooSDHC: Register Dump ******************************************************
VoodooSDHC: reportEjectability
VoodooSDHC: SDMASysAddr: 0x00000000 PresentState: 0x00000000
VoodooSDHC: BlockSize: 0x0000 BlockCount: 0x0000
VoodooSDHC: TransferMode: 0x0000 Command: 0x0000
VoodooSDHC: HostControl: 0x00 PowerControl: 0x00
VoodooSDHC: BlockGapControl: 0x00 WakeupControl: 0x00
VoodooSDHC: ClockControl: 0x0000 TimeoutControl: 0x00
VoodooSDHC: SoftwareReset: 0x00 NormalIntStatus: 0x0000
VoodooSDHC: ErrorIntStatus: 0x0000 NormalIntStatusEn: 0x0000
VoodooSDHC: ErrorIntStatusEn: 0x0000 NormalIntSignalEn: 0x0000
VoodooSDHC: ErrorIntSignalEn: 0x0000 CMD12ErrorStatus: 0x0000
VoodooSDHC: Capabilities[1]: 0x00000000 Capabilities[0]: 0x00000000
VoodooSDHC: MaxCurrentCap[1]: 0x00000000 MaxCurrentCap[0]: 0x00000000
VoodooSDHC: ForceEventCMD12ErrStatus: 0x0000 ForceEventErrorIntStatus: 0x0000
VoodooSDHC: AMDAErrorStatus: 0x00 Argument 0x00000000
VoodooSDHC: ADMASystemAddr[1]: 0x00000000 ADMASystemAddr[0]: 0x00000000
VoodooSDHC: SlotIntStatus: 0x0000 HostControllerVer: 0x0000
VoodooSDHC: Response[1]: 0x00000000 Response[0]: 0x3e3b001f
VoodooSDHC: Response[3]: 0x00000000 Response[2]: 0x00000000
VoodooSDHC: End of Register Dump************************************************
Maybe the card is not supported, you could insert my card reader, or have information if this is possible?
Thanks in advance
-
Hi,
I have the same problem as Mickey1979.
It would be nice if you can add support for this or give us the SC.
My device is an RTs5209
His device is a RTs5209 with subvendor HP VID103c
There is an Linux SC I'll attach them.
Until now I didn't get this device working in my OS X.
But if someone have an advice move on :D
Thanks
-
Thanks ::)