Chameleon => The Black Hole => Topic started by: Frozeninreality on April 14, 2010, 01:33:31 AM

Title: A little help?
Post by: Frozeninreality on April 14, 2010, 01:33:31 AM
Hello.  My name is Randy, and recently I decided hey...I want a mac.  Now I got ahold of 2 different disks, one is Ideneb the other is iatk?  Anyways, I tried for hours to install, changing every setting I could in bios, with no avail.  What Im going to do first is list every piece of hardware I have.

Motherboard: Biostar TA790GX A2+
Ram: 4gb Gskill DDR2-800
Video card: GTX260
Chip: Phenom II 810
Sound card: Sound blaster Live! 24 bit
Hard drives: (to be installed to) will be a WD Caviar Black 500GB, BUT Im trying a mock install to a Travelstar 80gb Laptop HDD (sata)
DVD Drive: DVD Multi+lightscribe (Not sure the manufacturer)

All of my components run sata.

     Now, Through hours of tweaking I FINALLY got to the installer screen...once...but it didnt see my harddisk, and when I restarted to try again (no settings changed) I couldnt get back to it.  I see alot of "Waiting for UUID" warnings at the bottom of the list (I do -v) but I cant for the life of me figure out how to get around it.  If there are any handy workarounds it would be nice.  Or, if someone knows of a version more likely to work with my system that would be wonderful too!  Thanks =)
Title: Re: A little help?
Post by: Lord Anubis on April 14, 2010, 10:56:50 AM

With Chameleon, you will use a 'vanilla' osx install, not the one's that you mentioned ( you do know the difference ). For those, you need to go to their site or to insanelymac for more information. If you want to use Chameleon as a booter ( its good to check this how it works ) then you have to use a original osx 10.5 or 10.6 disc.

Anyway, this forum is focussed on Chameleon and not directly for installments.

HTH and good luck.

↓ Previous posts leading to misunderstanding cleaned.