I really like, but download is not down, you can send me mail go?Ok, sent!
lee_vz@163.com
Thank you!
Just downloaded and installed. Looks great!! Wish I could get rid of the 1" black boarder around the screen.
What is going on =P
PM'ed you an mirror link, though I don't understand why people are having trouble with the download.
..I don't understand why people are having trouble with the download.Hi Enzo :)
I love this theme! How do I get it looking right for 1920x1200. I am using the correct background, but the logos are short and fat and the text is stretched and hard to read. My monitor uses 1920x1200, but if I look at the video info the highest res shown is 1920x1440 or 1600x1200. Is that the problem? Do my monitor and graphics card not match up? Am I just SOL with this monitor?
How do I compensate for the stretch?
Can I put this theme in incoming new Chameleon Wizard's version, that will have theme support?
http://dl.dropbox.com/u/7085278/Chameleon_Installer/cw_themes.PNG
Please 2560x1440 resolution.Can Chameleon 2 do native 2560x1600/1440 at boot now? It didn't the last time I checked, though that was a while ago. Maybe it's only a limitation with graphics cards. If that res isn't a VESA standard for it, then it won't work either.
thanks again.
@7ender
Well if it supports a max of 1280x800, then maybe you can try just setting 1280x800 in Cham's boot.plist and swapping out the background image with the one that's 1280x800.
Plz...change the boot photo of windows...flower no...logo windows 7 yes !!!Whoops, missed this post. Well, perhaps you can give the PSD a whirl? =P Either that or wait for me to make a set =P.
Congratulations...amazing theme!!!
Plz...change the boot photo of windows...flower no...logo windows 7 yes !!!Whoops, missed this post. Well, perhaps you can give the PSD a whirl? =P Either that or wait for me to make a set =P.
Congratulations...amazing theme!!!
oh my god ,,i cant download....tell me whyNot even the mirror?
Hello again nesnfsn,Pardon my naivete, should I try the framebuffers out when selecting boot options/flags such as "-v", "-f", "-x", etc. So that I would enter say, GraphicsEnabler=Yes AtiConfig=Duckweed (that is the listed framebuffer for my 6850 card) AtiPorts=3? My card has 4 ports, but 2 of them are DVI-I Duals. So I guess I would use 3. Do I have to use all three options/flags simultaneously?
As for the 6850 showing only one DVI, are you using GraphicsEnabler=Yes? If not, not it could explain it. AFAIK, though a lot of ATI cards work OOB with 10.6.7/Lion, they still require the right framebuffer for it to be fully functional. Or if you do have it set to Yes, then perhaps trying a different framebuffer may help.
In regards to the strange theme problems, they again make no sense to me haha. The only real potential variable in themes is maybe a large background image (which I always recommend to use the same resolution displayed by Cham), and perhaps the resolution specified in the theme.plist. Both of which are negated by the fact that any Cham2 RC5+ build uses the resolution specified in the boot.plist. Furthermore, up until the screen goes black and the real driver kicks in, it is using pure VESA standards to display an image, so it's rather irrelevant if the card is fully working in the OS. Sorry I can't be of more help.Card apparently uses VESA 3.0, is that the standard that Chameleon and its themes are built around? If not, perhaps that explains some of the problems. If 3.0 is covered, then I am running out of ideas on how to get this working properly with themes other than the default theme.
Thanks Enzo for your graphics. I have no find where is my question about different cats so write here.
I use you leopard picture for other project. I think you have no objection about this?
(http://s2.ipicture.ru/uploads/20111118/6FN1Gv7v.png)
Thanks Enzo for your graphics. I have no find where is my question about different cats so write here.
I use you leopard picture for other project. I think you have no objection about this?
(http://s2.ipicture.ru/uploads/20111118/6FN1Gv7v.png)
I don't understand why people are having trouble with the download.
I really like this theme! I have a question though. I have a SL drive and a Lion drive. How do I get the right logo to the right drive during boot selection?Hello Anthony,
Thanks,
Anthony
Hi Slice. Which version of Chameleon is able to recognize different cats (version) of OS X?Really Chameleon do it. Lion and Snow must be booted different way so the bootloader already knows OS version.
Hello Anthony,
This is currently not possible AFAIK. I believe it is being worked on however, the ability to detect different versions of OS X.
Hello Anthony,
This is currently not possible AFAIK. I believe it is being worked on however, the ability to detect different versions of OS X.
hi Enzo,
one word ....... Congratulation.
this theme rocks, and here is a version of my branch that is able to detect the OS(x) version of each volume
u can install it on an usb key to test it ;)
the good new is that it will be easily portable to the trunk,
if you want to test it, please use the version of "LoginToLion" and the boot file (modules are not really needed) provided inside the archive here : http://www.mediafire.com/?39rk6dt9rwmf8kx (deprecated !!, see my branch for a faster and updated version)
Hi onecubeowner, try using the latest code from the trunk to see if that works for you. You can use the latest build from the Buildbot (http://builds.voodooprojects.org/builds/Xcode4.1/).
OS detection was added to the trunk in commit #1738 (http://forge.voodooprojects.org/p/chameleon/source/commit/1738/).Thanks Blackosx for pointing this out. It was only a matter of renaming the png files. And it works! Thanks Enzo for a beautiful theme.
However, it's good to have another contributor here so I want to encourage you to continue, though in this case I'm not sure what's the best way to proceed here. Either you could:
A) Ask Enzo if it's okay to release this as a separate theme?
B) Ask Enzo to add these icons to his theme?
C) Liaise with Enzo and Cparm and arrange to combine all variations together in to one master theme?
Enzo, cparm - What do you think would be the best way to sort this?
Regards
blackosx
i think the best solution would to use the voodoo forge as we use it for chameleon or for the prefpane, with a trunk (the official release) and different branches , what do you think ?A "SVN" themes repository?
@Fabio - I see you've already updated the code in your branch - however, I suggest you check a post at the Chameleon installer topic at Insanelymac about the ml icons showing for the lion partitions for your branch.Last OT
@fraomI've 2.1 svn trunk 1547
Do you have a recent build of Cham?
@fraomI've 2.1 svn trunk 1547
Do you have a recent build of Cham?
@fraomI've 2.1 svn trunk 1547
Do you have a recent build of Cham?
I believe you need to update. Pretty sure OS Detection was added after your build.
@fraomI've 2.1 svn trunk 1547
Do you have a recent build of Cham?
I believe you need to update. Pretty sure OS Detection was added after your build.
Ok, thanks, but whant is the last version ?
I've installed it whitout options, and download from chameleon wizard your logintolion + alternat.. But i've the same problem all partiti in have the icon whit "lion" .....The theme version that's in the chamber wizard may be outdated. The first version didn't have the files named appropriately since that functionality was yet to be added officially. Try downloading it from here.
Ok now work :) ... But don't have the correct resolution.... I'm going to theme.plist and change whidt and higth is correct ??
Hi! I just installed this theme, it's cool, but showing 'Lion' icon for both 'Lion' and 'Mountain Lion' partitions, I've checked png folder, there are ML file but not detecting ML.
Which text is overlapping Magnifico?
Not sure why it'd do this. You could try using another font or creating your own: http://cl.ly/Ixmu. Did you happen to adjust the font pngs perhaps?
Updated original link, rolled in Win8 pack as well.
The original link is in the original post, with the graphic DL button. The Mavericks and Win8 icons are within the Alternates folder, which may be why you're not seeing them.
Hi, I have three OS' on my computer (Yosemite, Win 7 and Win 8.1). Is there any way to assign individual Windows icons to identify the differing NTFS drives? Thanks.