Hi I set up an Apple RAID Volume.
I installed CHameleon, and set it to EFI Install.
two questions... Kind Of...
How do I insert my own KEXT files ?
When I attempted to boot into it I did not even see the drive...
So What do I need to do Now ??
I saw these file Boot Boot0 etc in a seperate download with this expaination ...
RAID Install:
-------------
Suppose that your installation is on /dev/disk3, which is either a mirror- or a
stripeset consisting of /dev/disk0 and /dev/disk1
Mac OS X creates a small helper partition at the end of each RAID member disk,
namely /dev/disk0s3 and /dev/disk1s3
- Install boot0 to the MBR of both disks:
sudo fdisk -f boot0 -u -y /dev/rdisk0
sudo fdisk -f boot0 -u -y /dev/rdisk1
- Install boot1h to the bootsector of each boot partition:
sudo dd if=boot1h of=/dev/rdisk0s3
sudo dd if=boot1h of=/dev/rdisk1s3
- Install boot to both helper partition's root directories.
diskutil mount disk0s3
cp boot /Volumes/Boot\ OSX
diskutil unmount disk0s3
diskutil mount disk1s3
cp boot /Volumes/Boot\ OSX
diskutil unmount disk1s3
Is this what I need to do ?
Why are these files seperate from the "Installer " ?
Sorry for questions...
Thanks...
Thanks..